Loading ...
Loading ...
Loading ...
14
ASSEMBLY
INSTALLING THE CUTTING HEAD SHIELD
(DXGST227CS)
1. Remove the wing nut and washer from the cutting head shield.
2. Insert the short tab (the one without a hole) on the mount bracket into the slot on the cutting head
shield (Fig. 1).
3. Rotate the cutting head shield counterclockwise to align the hole on the cutting head shield with
the hole on the mount bracket (Fig. 1).
4. Insert the square bolt into the hole underneath the cutting head shield (Fig. 2). Push the square
bolt through the cutting head shield and mount bracket.
5. Place the washer onto the square bolt (Fig. 2).
6. Screw the wing nut onto the square bolt until the cutting head shield is rmly in place (Fig. 2).
Fig. 1
Mount Bracket
Cutting Head Shield
Slot
WARNING: To prevent serious personal injury, never operate the unit without the
cutting head shield in place.
Fig. 2
Washer
Square Bolt
Wing Nut
Cutting Head Shield
Mount Bracket
Loading ...
Loading ...
Loading ...