Loading ...
Loading ...
Loading ...
72
6. Communications
6.1 Web Management Card
Tripp Lite’s WEBCARDLXMINI is an optional accessory available for all models.
The WEBCARDLXMINI card enables remote monitoring and control through
several interfaces: HTML5 web via HTTP(S), menu/CLI via SSH/Telnet, and SNMP
for integration with software management platforms, such as DCIM. Using
WEBCARDLXMINI in your UPS combined with Tripp Lite’s network-enabled
switched PDUs, you can manage power throughout your facility and receive
automated alerts to identify problems before they cause downtime.
WEBCARDLXMINI also supports a family of sensors for remotely monitoring
environmental conditions. You can link up to three sensors together, connecting
them to a single port on the WEBCARDLXMINI. We oer free PowerAlert
®
Network Management System software. Learn more and download at
Tripplite.Eaton.com/products/power-alert.
6.1.1 WEBCARDLXMINI Features
The following is an introduction to the features of Tripp Lite’s
WEBCARDLXMINI. To view the full description of the
card’s functionality, download its Owner’s Manual at
Tripplite.Eaton.com/support.
A
Ethernet Port: RJ45 jack connects the
WEBCARDLXMINI to the network using a standard
Ethernet patch cable. The Link LED
A1
and Status
LED
A2
indicate the operating conditions.
B
Micro-USB Port: Use this port to directly connect with a computer running a terminal emulation program.
C
Type-A USB Port: Use this port to connect an ENVIROSENSE 2 module (E2MT, E2MTDO, E2MTDI, E2MTHDI) for a variety of
environmental monitoring and control options. See Tripplite.Eaton.com for more information about these modules.
Note: Do not connect a keyboard or mouse to this port.
D
Reset Button: The reset button is recessed, accessible through a small hole under the RJ45 network port.
E
Status LED: Shows WEBCARDLXMINI status.
6.2 Relay Card (Coming Soon)
A 10-pin terminal supports a relay card to provide bypass, utility failure, inverter on, battery low, UPS fault, UPS alarm
and UPS shutdown functions.
The relay communication card contains six dry contact outputs and one dry input. The inputs and outputs are factory
programmed according to functions listed in the following table.
Relay Contacts (Communication Card)
Pin Function Description Input or Output
1 Utility Failure
Output
2
Battery Low
3
4 Bypass On
5 UPS Fault
6 Inverter On
7 Summary Alarm
8 Common
9 Remote Shutdown + Input (5V to12V)
A
D E
A1 A2
B C
Loading ...
Loading ...
Loading ...