Loading ...
Loading ...
Loading ...
13
HOW TO USE
• Note: If the steam outlet becomes blocked: Turn the steam knob to “O” posi-
tion and allow the coffee maker cool down for about half an hour, then poke the
steam outlet several times with a needle about 1mm in diameter until it clears.
• Finally, press down the steam button and turn on the steam knob to check
if the appliance can produce steam normally when the steam indicator (yellow)
illuminates. Please contact the service department if the appliance can not
produce steam after performing the above operation
• Please see the section below about lime scale. It can seriously damage the
machine if steps are not taken to mitigate it.
• Note: after steaming, we recommend you allow the machine to cool down for
at least for 5 mins before making coffee again. Otherwise a burnt odour may
manifest itself in your Espresso coffee.
• If you want to make more coffee immediately press and release the steam
button to the OUT position; dip the steam wand into a cup, Press the pump
control button down to the lower position and turn on the steam control
knob and there will be water flowing from steam wand ; after the ready indica-
tor goes out, press and release the pump control button to the OUT posi-
tion, then turn the steam control knob to “O” position. When the ready indicator
illuminates, you can start to brew coffee again.
FROTHING MILK/PRODUCING STEAM TO HEAT LIQUIDS
The steam wand can be used to froth milk and make hot beverages like drinking
chocolate, water or tea.
• Remove the tank and fill it with required amount of water, the water level should
not exceed the “MAX” mark in the tank. Then insert the tank on to the appli-
ance.
• Connect the appliance to power supply and press down the ON/OFF button
to turn on the unit, the power indicator (red) illuminates.
• Press down the pump control button to the lower position, make sure the
steam button is at the OUT position, the pump will pump water, when there
is water flowing out, close the pump immediately.
• Press down the steam button to the lower position and wait for a mo-
ment. The appliance begins to heat until the (yellow) lamp illuminates, it means
the heating is finished.
SK22110_IM.indd 13 30/01/2020 10:54
Loading ...
Loading ...
Loading ...