Loading ...
Loading ...
Loading ...
Left Hand
Mandrel
Cover _
Screws
Idler
Pulleys
Primary
Idler Arm
Spring
Electric
Clutc'n
Pulley
Left
Hand
Mandrel
Mower
Drive Belt
Belt
Keepers
Bolt in
Housing
TO REPLACE MOWER BLADE DRIVE
BELT
Park the tractor on level surface. Engage
parking brake.
• Remove mower drive belt (See "TO
REPLACE MOWER DRIVE BELT' in
this section of this manual).
• Remove mower (See "TO REMOVE
MOWER" in this section of this
manual).
• Remove screws from R.H. mandrel
cover and remove cover. Unhook
spring from bolt on mower housing.
• Carefully roll belt off R.H. mandrel
pulley.
• Remove belt from center mandrel
pulley, idler pulley, and L.H. mandrel
pulley.
• Remove any dirt or grass which may
have accumulated around mandrels
and entire upper deck surface.
• Check secondary idler arm and idler to
see that they rotate freely.
• Be sure spring is hooked in secondary
idler arm and sway-bar bracket.
• Install new belt in lower groove of L.H.
mandrel pulley, idler pulley, and
center mandrel pulley as shown,
• Roll belt over R.H. mandrel pulley.
Make sure belt is in all grooves
properly.
• Reconnect spring to bolt in mowe,
housing and reinstall R.H. mandn
cover.
• Reinstall mower to tractor (See
"iNSTALL MOWER AND DRIVE Bi
in the Assembly section of this
manual).
• Reassemble mower drive belt (Se
"TO REPLACE MOWER DRIVE BE
in th(s section of this manual).
Left Center
Hand Mower Blade Mandrel
Mandrel Drive Belt Right I
Mandr
Cover
Idler Ar_m/
Spring
Anit-Swa
Bar Bracket
Pulley
Screw
25
TO ADJUST ATTACHMENT CLU1
The electric clutch should provide y_
of service. The clutch has a built-in
that stops the pulley within 5 second:
Loading ...
Loading ...
Loading ...