Kenmore 79090119013 electric range

User Manual - Page 7

For 79090119013.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Before Setting Oven Controls
Oven vent location
The oven vent is located under the |eft rear su_ace
eJemen| (See Fig. 1). When the oven is on, warm air passes
through this vent. This venting is necessary for proper air
circulation in the oven and good baking results. Do not
block oven vent.
oven vent
1
L
Fig. 1
Removing, replacing and arranging racks
Always use pot holders or oven mitts when
using the oven. When cooking, the oven interior, exterior,
oven racks and cooktop will become very hot which can
cause burns
Arranging - always arrange
the oven racks when the oven
is cool (prior to operating the .........................
oven).
To remove - pull the rack
forward until it stops. Lift up
front of rack and slide out.
To replace - fit the rack onto
the guides on the oven walls.
Tilt the front of the rack
upward and slide the rack
back into place.
Fig. 2
Recommended oven rack positions by food type:
(Refer to Fig. 2 for oven rack positions)
Food type Position
Broiling
Cookies, cakes, pies, biscuits & muffins
Frozen pies, angel food cake, yeast, bread
and casseroles
Small cuts of meat or poultry
Turkey, roast or ham
See broil
2or3
lor2
lor2
1
Types of oven racks
fiat handle
ck
fl V
ov _ _ offset
oven rack
The flat oven rack or fiat handle oven rack (on some
models) may be used for most cooking needs.
The offset oven rack (on some models) will place the base
of the rack about 1/2 of a rack position lower than a flat
oven rack. This feature provides several additional possible
oven rack positions.
Air circulation in the oven
For best baking results allow 2-4" (5-10 cm) around the
cookware for proper air circulation and be sure pans and
cookware do not touch each other, the oven door, sides or
back of the oven cavity. Hot air must be able to circulate
around the pans and cool<ware in the oven for even heat to
reach around the food.
Loading ...
Loading ...
Loading ...