Loading ...
Loading ...
Loading ...
7
if the device has been positioned horizontally
( integral condensing unit ).wait two hours
before activating it. Packing and protective
film should be disposed off as indicated by
the local authorities. The equipment must
not be installed within explosive amblence,
In the open air or exposed to rain the correct
In the open air or exposed to rain the correct
siting is; distant from direct sources ( radiators,
direct lighting, etc...) and protected from direct
sunlight and draughts. Air circulation must be freely
maintained around the condensing unit, be it integral or remote.
In observance of these specific conditions will detrimentally affect the
cabinet.
5.2 INITIAL CLEANING
Before use all parts of the cabinet should be
cleaned, For the walls and all the internal parts
use an antibacterial detergent. For the plastic
parts use a moistened cloth. Dry with a soft
clean cloth. use little or no water.
Do not use harsh or abrasive solvents or
Do not use harsh or abrasive solvents or
detergents
During cleaning do not approach bare-handed those parts which could
cut ( evaporator, condenser, etc. )and always use protective gloves.
5.3 Electrical connection
Check that the supply conforms to the requirements listed on the factory
label and that it is provided with a fall-safe protection or automatic circuit
Loading ...
Loading ...
Loading ...