Home
Bookmarks
Home
Bosch
Bosch DWI37RV60/02 User Manual
Page 20
Bosch DWI37RV60/02 Serie 8 Cube
User Manual - Page 20
For DWI37RV60/02.
PDF File Manual
,
20 pages
,
Read Online
|
Download pdf file
[en] Instructions for installation and use
Extractor hood
Table of contents
[en] Instructions for installation and use
Instruction manual
Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com and in the online shop www.bosch-eshop.com
8 Intended use
Intended use
Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
This appliance is intended for domestic use and the household environment only. The appliance is not intended for use outside. Do not leave the appliance unattended during operation. The manufacturer is not liable for damage which is caused by improp...
This appliance is intended for use up to a maximum height of 2000 metres above sea level.
This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised by someone who is responsible for their sa...
Children must not play with the appliance.Cleaning and user maintenance must not be performed by children unless they are over 15 years of age and are supervised.
Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
This appliance is not designed to be used above gas-burning appliances.
This appliance is not intended for operation with an external clock timer or a remote control.
( Important safety information
Important safety information
: Warning
Danger of suffocation!
: Warning
Risk of fire!
: Warning
Risk of burns!
: Warning
Risk of injury!
: Warning
Risk of electric shock!
Causes of damage
Caution!
Always replace faulty bulbs to prevent the remaining bulbs from overloading.
Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth.
Surface damage due to incorrect cleaning. Clean stainless steel surfaces in the direction of the grain only. Do not use any stainless steel cleaners for operator controls.
Surface damage due to strong or abrasive cleaning agents. Never use strong and abrasive cleaning agents.
Risk of damage as a result of incorrect loading of design elements. Do not pull design elements.Do not place objects on the design elements or hang objects from them.
7 Environmental protection
Environmental protection
Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly.
Saving energy
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
1 Operating the appliance
Operating the appliance
These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance.
Note:
Control panel
Symbol
Explanation
Indicator
Explanation
Setting the fan
Switching on
1. Touch the # symbol.
2. Use the rotary selector to select the fan setting.
Note:
Switching off
Touch the # symbol.
Intensive setting
You can use the intensive setting if there is a large build-up of odours and fumes/vapours.
Switching on
Turn the rotary selector until ˜‚ or ˜ƒ is displayed.
Note:
Switching off
If you want to end the intensive mode before the set time has elapsed, turn the rotary selector anti-clockwise.
Automatic mode
Switching on
Touch the > symbol.
The optimum fan setting (‘‚-‘†) is set automatically using the PerfectAir sensor.
Switching off
Touch the > symbol to switch off automatic mode.
The fan will switch itself off automatically if the PerfectAir sensor detects no further change in the air quality in the room. The appliance will switch back to the fan setting that was last selected.
Automatic mode can run for a maximum of 4 hours.
Sensor control
In automatic mode, the PerfectAir sensor in the extractor hood detects the intensity of the cooking and roasting odours. Depending on the setting of the PerfectAir sensor, the fan automatically switches itself to another fan setting.
Possible sensor settings:
Default sensitivity setting: ‡
Lowest sensitivity setting: ‚
Highest sensitivity setting: ‚‹
If the sensor controller responds too strongly or not enough, it can be changed accordingly:
1. Touch and hold the > symbol when the fan is switched off. The setting will be displayed.
2. Use the control ring to select the setting you require.
3. Take your finger off the > symbol.
Fan run-on time
Switching on
Touch the y symbol.
The fan runs at fan setting 1.
The remaining minutes of the run-on time are shown in the display.
After approx. 10 minutes, the fan switches off automatically.
Note:
Switching off
Touch the y symbol.
This immediately stops the fan run-on. The appliance switches to the fan setting that was previously set.
Lighting
The lighting can be switched on and off independently of the fan.
Touch the B symbol.
Setting the brightness
Press and hold the B symbol until the required brightness is reached.
Saturation display
If the metal grease filters or activated charcoal filter are/ is saturated, the corresponding symbols will flash once the appliance has been switched off:
If you have not yet done so, the metal grease filters should now be cleaned or the activated charcoal filter replaced. ~ "Cleaning and maintenance" on page 10
The saturation indicators can be reset while they are flashing. To do this, touch the # symbol.
Switching over the display for the air circulation mode
For air recirculation mode, the electronic controller must be switched over accordingly:
Audible signal
Switching on
Touch and hold the # and y symbols at the same time for approximately three seconds when the fan is switched off. As confirmation, an audible signal sounds and ‚ is shown in the display.
Switching off
Touch and hold the # and y symbols at the same time for approximately three seconds when the fan is switched off. As confirmation, ‹ is shown in the display.
e Connecting to a hob
Connecting to a hob
You can connect this appliance to a hob (if the hob supports connection to the appliance) and then control the functions of the hood via your hob.
Appliances can be connected to each other in different ways:
Home Connect
Two appliances can be connected using the Home Connect app provided that both of them are Home Connect compatible.
Refer to the Home Connect documents supplied for more information.
Connecting appliances directly
If the appliance is connected directly to a hob, it cannot be connected to your home network as well. The appliance will function as an extractor hood that is not connected to the network and you can continue to operate it via the control panel.
Connecting appliances via your home network
If the appliances are connected to each other via your home network, both the hood controls on the hob and Home Connect can be used to operate the appliance.
Notes
Setting up a connection
The hood must be switched off before you can connect the hob and extractor hood.
Connecting directly
Ensure that the hob is switched on and is in search mode.
To do this, refer to the section entitled "Connecting to the extractor hood" in the instruction manual for your hob.
Notes
Press and hold the : and > symbols until the D and Ù indicators start flashing.
The extractor hood has been connected to the hob when the D stops flashing and remains continuously lit.
Connecting via your home network
Follow the instructions in the section entitled "Automatic login to your home network" or "Manually logging into your home network" ~ "Home Connect" on page 8
Once the extractor hood is connected to your home network, you can connect to the hob via the Home Connect app. To do this. follow the instructions on your mobile device.
o Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be controlled using a mobile device.
If the appliance is not connected to your home network, it will function as an extractor hood with no network connection and can still be operated via the display.
The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country.You can find more information on this at www.home-connect.com.
Notes
Setting up
To implement settings via Home Connect, you must have installed and set up the Home Connect app on your mobile device.
Refer to the Home Connect documents supplied for more information.
Follow the steps specified by the app to implement the settings.
The app must be open in order to perform the set-up process.
Note:
Automatic registration in the home network
Notes
1. Press and hold the : and > symbols until the D and Ù indicators start flashing.
2. To start the automatic login to the home network, turn the rotary selector clockwise until D and ‚ flash.
3. Press the WPS button on the router within the next two minutes.
Note:
4. On your mobile device, follow the instructions for automatic network login.
Manual registration in the home network
Notes
1. Press and hold the : and > symbols until the D and Ù indicators start flashing.
2. To start the manual login to the home network, turn the rotary selector clockwise until D and ƒ flash.
3. Use the "Home Connect" SSID and the "Home Connect" key to log the mobile device into the extractor hood network.
4. On your mobile device, follow the instructions for manually logging into your network.
Connecting to the app
If the Home Connect app is installed on your mobile device, you can connect it to your extractor hood.
Notes
1. Press and hold the : and > symbols until the D and „ indicators start flashing.
2. On your mobile device, follow the instructions in the Home Connect app.
Software update
Using the software update function, your extractor hood's software can be updated (e.g. for the purpose of optimisation, troubleshooting or security updates). To do this, you need to be a registered Home Connect user, have installed the app on your m...
As soon as a software update is available, you will be informed through the Home Connect app and will be able to start the software update via the app.
Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are on your local area network.
The Home Connect app will inform you once installation is complete.
Notes
Resetting the connection
You can reset the connections you have saved on your home network and on Home Connect at any time.
Press and hold the # and > symbols until the D symbol goes out. When the audible signal is switched on, an audible signal sounds.
About data protection
When your appliance is connected for the first time to a WLAN network, which is connected to the Internet, your appliance transmits the following categories of data to the Home Connect server (initial registration):
This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time.
Note:
Declaration of Conformity
Robert Bosch Hausgeräte GmbH hereby declares that the appliance which features Home Connect is in accordance with the basic requirements and the other relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www.bosch-home.com/de on the product page for appliance in the additional documents.
2 Cleaning and maintenance
Cleaning and maintenance
: Warning
Risk of injury!
: Warning
Risk of electric shock!
: Warning
Risk of electric shock!
: Warning
Risk of injury!
Cleaning agents
To ensure that the different surfaces are not damaged by using the wrong cleaning product, follow the instructions in the table. Do not use any of the following:
Note:
Note:
Area
Cleaning products
Removing metal grease filter
1. Open the lock and swing down the metal grease filter. When you do this, take hold of the metal grease filter from underneath with your other hand.
2. Take the metal grease filter out of the holder.
Notes
3. Clean the metal grease filter.
4. Clean the accessible parts of the housing. Clean the inside of the appliance.
: Warning
Risk of injury!
Cleaning the metal mesh grease filters
These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance.
: Warning
Risk of fire!
Notes
By hand:
Note:
In the dishwasher:
Note:
Installing the metal mesh grease filter
1. Insert the metal grease filter. When you do this, take hold of the metal grease filter from underneath with your other hand.
Note:
2. Swing the metal grease filter up and click it into place.
3. If the metal grease filter has not been inserted correctly, open the lock and reinsert the metal grease filter correctly.
Replacing the activated charcoal filter
Note:
1. Open the cover on the top of the appliance.
2. Remove the old activated charcoal filter and insert the new one.
3. Close the cover.
4. Reset the saturation indicator.~ "Saturation display" on page 6
3 Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service.
: Warning
Risk of electric shock!
Malfunction table
Problem
Possible cause
Solution
LED lights
Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only.
: Warning
Risk of injury!
4 Customer service
Customer service
When calling us, please quote the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. These numbers can be found on the rating plate on the top of the appliance (to access it, you will need to...
You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.
E no.
FD no.
Please be aware that a visit by an after-sales engineer will be charged if a problem turns out to be the result of operator error, even during the warranty period.
Please find the contact data of all countries in the enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts for your appliances.
Accessories
(not included in the scope of delivery)
Note:
Note:
Installation instructions
( Important safety information
Important safety information
Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
The surfaces of the appliance are easily damaged. Avoid damaging them during installation.
For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
: Warning
Risk of fire!
: Warning
Risk of injury!
: Warning
Risk of electric shock!
: Warning
Risk of electric shock!
: Warning
Danger of suffocation!
K General information
General information
Checking the wall
Electrical connection
: Warning
Risk of electric shock!
The required connection data can be found on the rating plate inside the appliance; to do this, remove the metal mesh grease filter.
Length of the cable: approx. 1.30 m
This appliance complies with the EC interference suppression regulations.
: Warning
Risk of electric shock!
5 Installation
Installation
Preparing for installation
Caution!
1. Determine where the extractor hood should be positioned and lightly mark where the lower edge of the appliance should be on the wall. Determine where the middle should be based on the hob.
Note:
2. Place the template against the line drawn on the wall. Mark where the screws should be inserted.
3. Drill three 8 mm diameter holes to a depth of 80 mm for fastening the appliance and press in the wall plugs flush with the wall.
Preparing the appliance
1. Remove the activated charcoal filter from the film.
2. Open the cover on the top of the appliance and remove it ¨, insert the activated charcoal filter © and then close the cover.
Installation
1. Screw in the mounting supports for the extractor hood until they are hand-tight, use a spirit level to level the appliance and then screw the mounting supports in fully.
2. Screw in the threaded bolt, leaving it protruding out of the wall by 5 - 9 mm.
Hanging the appliance
1. If there is any protective film on the appliance, first remove the protective film from the back and, following installation, remove the rest of the film.
2. Remove the metal grease filter before hanging the appliance.
3. Hang the appliance on the wall.
4. Firmly tighten the knurled nuts.
5. Reinsert the metal grease filter and connect the power supply.
Page 20/20
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
Loading ...
Loading ...
Loading ...
970824
*9001196112*
9001196112
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
www.bosch-home.com
File type: PDF
File name: 50289546_dwi37rv60-01.pdf
File size: 1.97 MB
File Language: English
Pages: 20
Author: Bosch
File created: 2017-08-28
Published:
2023-12-14
Updated: 2023-12-13
Download File
Table of Contents
×
[en] Instructions for installation and use
1
Extractor hood
1
Table of contents
2
[en] Instructions for installation and use
2
Instruction manual
2
Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com and in the online shop www.bosch-eshop.com
2
8 Intended use
2
Intended use
2
Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
2
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
2
This appliance is intended for domestic use and the household environment only. The appliance is not intended for use outside. Do not leave the appliance unattended during operation. The manufacturer is not liable for damage which is caused by improp...
2
This appliance is intended for use up to a maximum height of 2000 metres above sea level.
2
This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised by someone who is responsible for their sa...
2
Children must not play with the appliance.Cleaning and user maintenance must not be performed by children unless they are over 15 years of age and are supervised.
2
Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
2
Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
2
This appliance is not designed to be used above gas-burning appliances.
2
This appliance is not intended for operation with an external clock timer or a remote control.
2
( Important safety information
3
Important safety information
3
: Warning
3
Danger of suffocation!
3
: Warning
3
Risk of fire!
3
: Warning
3
Risk of burns!
3
: Warning
3
Risk of injury!
3
: Warning
3
Risk of electric shock!
3
Causes of damage
4
Caution!
4
Always replace faulty bulbs to prevent the remaining bulbs from overloading.
4
Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth.
4
Surface damage due to incorrect cleaning. Clean stainless steel surfaces in the direction of the grain only. Do not use any stainless steel cleaners for operator controls.
4
Surface damage due to strong or abrasive cleaning agents. Never use strong and abrasive cleaning agents.
4
Risk of damage as a result of incorrect loading of design elements. Do not pull design elements.Do not place objects on the design elements or hang objects from them.
4
7 Environmental protection
4
Environmental protection
4
Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly.
4
Saving energy
4
Environmentally-friendly disposal
4
Dispose of packaging in an environmentally-friendly manner.
4
1 Operating the appliance
5
Operating the appliance
5
These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance.
5
Note:
5
Control panel
5
Symbol
5
Explanation
5
Indicator
5
Explanation
5
Setting the fan
5
Switching on
5
1. Touch the # symbol.
5
2. Use the rotary selector to select the fan setting.
5
Note:
5
Switching off
5
Touch the # symbol.
5
Intensive setting
5
You can use the intensive setting if there is a large build-up of odours and fumes/vapours.
5
Switching on
5
Turn the rotary selector until ˜‚ or ˜ƒ is displayed.
5
Note:
5
Switching off
5
If you want to end the intensive mode before the set time has elapsed, turn the rotary selector anti-clockwise.
5
Automatic mode
5
Switching on
5
Touch the > symbol.
5
The optimum fan setting (‘‚-‘†) is set automatically using the PerfectAir sensor.
5
Switching off
5
Touch the > symbol to switch off automatic mode.
5
The fan will switch itself off automatically if the PerfectAir sensor detects no further change in the air quality in the room. The appliance will switch back to the fan setting that was last selected.
5
Automatic mode can run for a maximum of 4 hours.
5
Sensor control
6
In automatic mode, the PerfectAir sensor in the extractor hood detects the intensity of the cooking and roasting odours. Depending on the setting of the PerfectAir sensor, the fan automatically switches itself to another fan setting.
6
Possible sensor settings:
6
Default sensitivity setting: ‡
6
Lowest sensitivity setting: ‚
6
Highest sensitivity setting: ‚‹
6
If the sensor controller responds too strongly or not enough, it can be changed accordingly:
6
1. Touch and hold the > symbol when the fan is switched off. The setting will be displayed.
6
2. Use the control ring to select the setting you require.
6
3. Take your finger off the > symbol.
6
Fan run-on time
6
Switching on
6
Touch the y symbol.
6
The fan runs at fan setting 1.
6
The remaining minutes of the run-on time are shown in the display.
6
After approx. 10 minutes, the fan switches off automatically.
6
Note:
6
Switching off
6
Touch the y symbol.
6
This immediately stops the fan run-on. The appliance switches to the fan setting that was previously set.
6
Lighting
6
The lighting can be switched on and off independently of the fan.
6
Touch the B symbol.
6
Setting the brightness
6
Press and hold the B symbol until the required brightness is reached.
6
Saturation display
6
If the metal grease filters or activated charcoal filter are/ is saturated, the corresponding symbols will flash once the appliance has been switched off:
6
If you have not yet done so, the metal grease filters should now be cleaned or the activated charcoal filter replaced. ~ "Cleaning and maintenance" on page 10
6
The saturation indicators can be reset while they are flashing. To do this, touch the # symbol.
6
Switching over the display for the air circulation mode
6
For air recirculation mode, the electronic controller must be switched over accordingly:
6
Audible signal
6
Switching on
6
Touch and hold the # and y symbols at the same time for approximately three seconds when the fan is switched off. As confirmation, an audible signal sounds and ‚ is shown in the display.
6
Switching off
6
Touch and hold the # and y symbols at the same time for approximately three seconds when the fan is switched off. As confirmation, ‹ is shown in the display.
6
e Connecting to a hob
7
Connecting to a hob
7
You can connect this appliance to a hob (if the hob supports connection to the appliance) and then control the functions of the hood via your hob.
7
Appliances can be connected to each other in different ways:
7
Home Connect
7
Two appliances can be connected using the Home Connect app provided that both of them are Home Connect compatible.
7
Refer to the Home Connect documents supplied for more information.
7
Connecting appliances directly
7
If the appliance is connected directly to a hob, it cannot be connected to your home network as well. The appliance will function as an extractor hood that is not connected to the network and you can continue to operate it via the control panel.
7
Connecting appliances via your home network
7
If the appliances are connected to each other via your home network, both the hood controls on the hob and Home Connect can be used to operate the appliance.
7
Notes
7
Setting up a connection
7
The hood must be switched off before you can connect the hob and extractor hood.
7
Connecting directly
7
Ensure that the hob is switched on and is in search mode.
7
To do this, refer to the section entitled "Connecting to the extractor hood" in the instruction manual for your hob.
7
Notes
7
Press and hold the : and > symbols until the D and Ù indicators start flashing.
7
The extractor hood has been connected to the hob when the D stops flashing and remains continuously lit.
7
Connecting via your home network
7
Follow the instructions in the section entitled "Automatic login to your home network" or "Manually logging into your home network" ~ "Home Connect" on page 8
7
Once the extractor hood is connected to your home network, you can connect to the hob via the Home Connect app. To do this. follow the instructions on your mobile device.
7
o Home Connect
8
Home Connect
8
This appliance is Wi-Fi-capable and can be controlled using a mobile device.
8
If the appliance is not connected to your home network, it will function as an extractor hood with no network connection and can still be operated via the display.
8
The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country.You can find more information on this at www.home-connect.com.
8
Notes
8
Setting up
8
To implement settings via Home Connect, you must have installed and set up the Home Connect app on your mobile device.
8
Refer to the Home Connect documents supplied for more information.
8
Follow the steps specified by the app to implement the settings.
8
The app must be open in order to perform the set-up process.
8
Note:
8
Automatic registration in the home network
8
Notes
8
1. Press and hold the : and > symbols until the D and Ù indicators start flashing.
8
2. To start the automatic login to the home network, turn the rotary selector clockwise until D and ‚ flash.
8
3. Press the WPS button on the router within the next two minutes.
8
Note:
8
4. On your mobile device, follow the instructions for automatic network login.
8
Manual registration in the home network
8
Notes
8
1. Press and hold the : and > symbols until the D and Ù indicators start flashing.
8
2. To start the manual login to the home network, turn the rotary selector clockwise until D and ƒ flash.
8
3. Use the "Home Connect" SSID and the "Home Connect" key to log the mobile device into the extractor hood network.
8
4. On your mobile device, follow the instructions for manually logging into your network.
8
Connecting to the app
9
If the Home Connect app is installed on your mobile device, you can connect it to your extractor hood.
9
Notes
9
1. Press and hold the : and > symbols until the D and „ indicators start flashing.
9
2. On your mobile device, follow the instructions in the Home Connect app.
9
Software update
9
Using the software update function, your extractor hood's software can be updated (e.g. for the purpose of optimisation, troubleshooting or security updates). To do this, you need to be a registered Home Connect user, have installed the app on your m...
9
As soon as a software update is available, you will be informed through the Home Connect app and will be able to start the software update via the app.
9
Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are on your local area network.
9
The Home Connect app will inform you once installation is complete.
9
Notes
9
Resetting the connection
9
You can reset the connections you have saved on your home network and on Home Connect at any time.
9
Press and hold the # and > symbols until the D symbol goes out. When the audible signal is switched on, an audible signal sounds.
9
About data protection
9
When your appliance is connected for the first time to a WLAN network, which is connected to the Internet, your appliance transmits the following categories of data to the Home Connect server (initial registration):
9
This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time.
9
Note:
9
Declaration of Conformity
9
Robert Bosch Hausgeräte GmbH hereby declares that the appliance which features Home Connect is in accordance with the basic requirements and the other relevant provisions of the directive 2014/53/EU.
9
A detailed RED Declaration of Conformity can be found online at www.bosch-home.com/de on the product page for appliance in the additional documents.
9
2 Cleaning and maintenance
10
Cleaning and maintenance
10
: Warning
10
Risk of injury!
10
: Warning
10
Risk of electric shock!
10
: Warning
10
Risk of electric shock!
10
: Warning
10
Risk of injury!
10
Cleaning agents
10
To ensure that the different surfaces are not damaged by using the wrong cleaning product, follow the instructions in the table. Do not use any of the following:
10
Note:
10
Note:
10
Area
10
Cleaning products
10
Removing metal grease filter
11
1. Open the lock and swing down the metal grease filter. When you do this, take hold of the metal grease filter from underneath with your other hand.
11
2. Take the metal grease filter out of the holder.
11
Notes
11
3. Clean the metal grease filter.
11
4. Clean the accessible parts of the housing. Clean the inside of the appliance.
11
: Warning
11
Risk of injury!
11
Cleaning the metal mesh grease filters
11
These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance.
11
: Warning
11
Risk of fire!
11
Notes
11
By hand:
11
Note:
11
In the dishwasher:
11
Note:
11
Installing the metal mesh grease filter
11
1. Insert the metal grease filter. When you do this, take hold of the metal grease filter from underneath with your other hand.
11
Note:
11
2. Swing the metal grease filter up and click it into place.
11
3. If the metal grease filter has not been inserted correctly, open the lock and reinsert the metal grease filter correctly.
11
Replacing the activated charcoal filter
12
Note:
12
1. Open the cover on the top of the appliance.
12
2. Remove the old activated charcoal filter and insert the new one.
12
3. Close the cover.
12
4. Reset the saturation indicator.~ "Saturation display" on page 6
12
3 Trouble shooting
12
Trouble shooting
12
Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service.
12
: Warning
12
Risk of electric shock!
12
Malfunction table
12
Problem
12
Possible cause
12
Solution
12
LED lights
12
Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only.
12
: Warning
12
Risk of injury!
12
4 Customer service
13
Customer service
13
When calling us, please quote the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. These numbers can be found on the rating plate on the top of the appliance (to access it, you will need to...
13
You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.
13
E no.
13
FD no.
13
Please be aware that a visit by an after-sales engineer will be charged if a problem turns out to be the result of operator error, even during the warranty period.
13
Please find the contact data of all countries in the enclosed customer service list.
13
To book an engineer visit and product advice
13
Rely on the professionalism of the manufacturer. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts for your appliances.
13
Accessories
13
(not included in the scope of delivery)
13
Note:
13
Note:
13
Installation instructions
14
( Important safety information
14
Important safety information
14
Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
14
Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
14
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
14
The surfaces of the appliance are easily damaged. Avoid damaging them during installation.
14
For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
14
: Warning
14
Risk of fire!
14
: Warning
15
Risk of injury!
15
: Warning
15
Risk of electric shock!
15
: Warning
15
Risk of electric shock!
15
: Warning
15
Danger of suffocation!
15
K General information
15
General information
15
Checking the wall
15
Electrical connection
15
: Warning
15
Risk of electric shock!
15
The required connection data can be found on the rating plate inside the appliance; to do this, remove the metal mesh grease filter.
15
Length of the cable: approx. 1.30 m
15
This appliance complies with the EC interference suppression regulations.
15
: Warning
15
Risk of electric shock!
15
5 Installation
16
Installation
16
Preparing for installation
16
Caution!
16
1. Determine where the extractor hood should be positioned and lightly mark where the lower edge of the appliance should be on the wall. Determine where the middle should be based on the hob.
16
Note:
16
2. Place the template against the line drawn on the wall. Mark where the screws should be inserted.
16
3. Drill three 8 mm diameter holes to a depth of 80 mm for fastening the appliance and press in the wall plugs flush with the wall.
16
Preparing the appliance
16
1. Remove the activated charcoal filter from the film.
16
2. Open the cover on the top of the appliance and remove it ¨, insert the activated charcoal filter © and then close the cover.
16
Installation
17
1. Screw in the mounting supports for the extractor hood until they are hand-tight, use a spirit level to level the appliance and then screw the mounting supports in fully.
17
2. Screw in the threaded bolt, leaving it protruding out of the wall by 5 - 9 mm.
17
Hanging the appliance
17
1. If there is any protective film on the appliance, first remove the protective film from the back and, following installation, remove the rest of the film.
17
2. Remove the metal grease filter before hanging the appliance.
17
3. Hang the appliance on the wall.
17
4. Firmly tighten the knurled nuts.
17
5. Reinsert the metal grease filter and connect the power supply.
17
Search:
×
Search
