Loading ...
Loading ...
Loading ...
16
CLEANING AND CARE:
CLEANING THE FILTER
3. Lift out the cone filter.
4. Rinse the cone filter under the tap.
5. Leave to fully dry for at least 24 hours
before placing back in the container.
To place back into the container, lower inside
the dust canister. Put the assembled filter back
into the dust container with the plastic side
facing upwards and close the lid.
It will ‘click’ and secure.
Repeat steps 1 and 2 on the previous page.
Cleaning the exhaust filter
There is a foam exhaust filter in the vacuum floor head that will need to be
cleaned regularly.
To remove the cover, push the clip left to unlock.
Remove the foam filter and follow the cleaning instructions on the previous
page.
Ensure you have allowed the filter to thoroughly dry and place back into the
cover.
Slot the assembled cover back onto the head and slide the clip right to the
‘LOCK’ position.
Loading ...
Loading ...
Loading ...