Loading ...
Loading ...
Loading ...
Network Camera User Manual
94
6. If you set the Protocol to EAP-TLS, select the Client Certificate and CA Certificate.
7. Click Save to save the settings.
Notes:
● A reboot is required for the settings to take effect.
● If the function is abnormal, check if the selected certificate is abnormal in
Certificate Management.
7.2.9 Integration Protocol
Purpose:
If you need to access to the camera through the third party platform, you can enable
CGI function. And if you need to access to the device through ONVIF protocol, you can
configure ONVIF user in this interface. Refer to ONVIF standard for detailed
configuration rules.
CGI
Check the Enable Hikvision_CGI checkbox and then select the authentication from
the drop-down list.
Note: Digest is the recommended authentication method.
ONVIF
Steps:
1. Check Enable ONVIF to enable the function.
2. Add ONVIF users. Up to 32 users are allowed.
Set the user name and password, and confirm the password. You can set the
user as media user, operator, and administrator.
Note: ONVIF user account is different from the camera user account. You have
set ONVIF user account independently.
3. Save the settings.
Note: User settings of ONVIF are cleared when you restore the camera.
Loading ...
Loading ...
Loading ...