Loading ...
Loading ...
Loading ...
11Get Started
Essential Wire-Free Video Doorbell
User Manual
Connect your Android device to a 2.4 GHz network
1. Unlock your device and tap Settings.
2. Tap Network & Internet > Wi-Fi.
3. Turn on WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
This is commonly indicated by a 2, 2.4, or 2G at the end of the network name.
5. If prompted, enter the password for the network.
When you’re connected to the WiFi network, the word Connected appears under the
network name.
Doorbell LED
The LED is on the outside of your doorbell and indicates how the doorbell is operating.
This section describes how the LED works if you didn’t change the default LED settings. For
information about changing the LED behavior, see
Control the LED on page 30.
The LED behaviors on your doorbell vary, depending on whether you have set it up.
LED behavior during setup
• Off . The battery is not in the doorbell, or the battery isn’t charged. For more information,
see
Charge the battery on page 8.
• Single white fl ash. The battery is correctly inserted in the doorbell.
• Flashing white. The doorbell is ready to connect to your WiFi router. A er you scan the QR
code in the Arlo Secure App, one of the following two behaviors happens:
• Rapid fl ashing white. The Arlo Secure App discovered your doorbell.
• Flashing amber. The Arlo Secure App did not discover your doorbell. Make sure that
both your doorbell and your mobile device are connected to the same 2.4 GHz WiFi
LED
Loading ...
Loading ...
Loading ...