1. Home
  2. Dahua
  3. Dahua NVR5216-16P-EI User Manual
  4. Page 133

Dahua NVR5216-16P-EI 16 Channels 1U 16PoE 2HDDs WizSense Network Video Recorder

Dahua Network Video Recorder User's Manual V2.3.4 - Page 133

For NVR5216-16P-EI.

PDF File Manual, 471 pages, Read Online | Download pdf file

NVR5216-16P-EI photo
Loading ...
Loading ...
Loading ...
Table 5-3 Network parameters
Parameter Description
Network Mode
●
Single NIC: Two network adapters work separately. If one of the
two network adapters is disconnected, the system network status
is regarded as oine.
●
Fault Tolerance: Two network adapters share one IP address.
Normally only one network adapter is working. When this adapter
fails, the other network adapter will start working automatically to
ensure the network connection.
When you test the network status, the network is regarded as
oine only when both network adapters are disconnected.
The two network adapters are used under the same LAN.
●
Load Balance: Two network adapters share one IP address. The
two adapters work at the same time to share the network load
averagely. If one of them fails, the other can continue working
normally.
When testing the network status, the network is regarded as
oine only when both of the two network adapters are
disconnected.
The two network adapters are used under the same LAN.
The Device with single Ethernet port does not support this function.
Default Ethernet Port
IP Version Select IPv4 or IPv6. Both versions are supported for access.
DHCP Enable the system to automatically obtain a dynamic IP address.
MAC Address Displays the MAC address of the Device.
IP Address
●
Enter the IP address and then congure the corresponding subnet
mask and default gateway.
●
After conguration, click Test to check whether there is conict in
IP address.
IP address and default gateway must be on the same network
segment.
Subnet Mask
Default Gateway
To unbind NIC, on the TCP/IP page, click . The unbinding will take eect after the
Device restarts.
3. On the TCP/IP page, congure DNS server. This step should be performed when you
enable the domain name service.
You can get DNS server address or manually enter it.
●
Automatically get DNS server address: When there is a DHCP server in the network,
you can enable DHCP, and then the Device gets a dynamic IP address.
User's Manual
119
Loading ...
Loading ...
Loading ...