Frigidaire CRA065AT712 Official Room Air Conditioner

User Manual - Page 9

For CRA065AT712.

PDF File Manual, 13 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
REMOTE SENSING FEATURE
i DO THIS;
PRESS REMOTE
SENSING
START BUTTON
dean
air
LIGHT pulsing ( On & Off intermittently ).
cool remote
econ sensing C
fan only m
timer MODE V ON=OFF A
NOTE: Unit display shows the set temperature
NOTE: Remote display
is actual temperature
Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling mode. at remote control only
To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing Start button. Next, use
the" A V "buttons to set the desired temperature at the remote. (Note that the set temperature wilt only be displayed on the unit
itself ). The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each time it
sends a signal. It will periodically send this signal until the feature is deactivated by pressing the remote sensing Stop button, tf the unit
does not receive the remote sensing signal during any 3 minute interval, the unit wilt beep to indicate the remote sensing mode has
ended. The display on the remote control indicates the temperature at the remote ONLY.
NOTE: The Remote Sensing function is terminated either by using the Remote Sensing Stop button or the main ON/OFF button on the
unit.
FAULT CODES;
remote
sensing
temp/timer
auto [] I
medhi fitter
lo reset
V ON=OFF A FAN SPEED steep
remote
sensing
temp/timer
auto []
medhi fitter
lo reset
V ON=OFF A FAN SPEED steep
If the display reads "AS", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
If the display reads "ES", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO CHANGE TEMPERATURE DISPLAY:
remote
sensing
V
temp/timer
auto i
hi. fitter
reed
lo reset
ON-OFF A FAN SPEED steep
/DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
YOU WILL SEE;
remote
sensing
ternp/timer
auto i
hi. fitter
reed
Io reset
VON-OFF A FAN SPEED steep
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
@2009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...