Loading ...
Loading ...
Loading ...
Cleaning the Cooktop
The cooktop is designed to make cleaning easier. Since the four burners are sealed, cleanups are easy when spillovers are
cleaned up immediately. To clean, wipe with aclean, damp cloth and wipe dry. DO NOT attempt to clean the cooktop when the
cooktop or burner heads are still hot. The contoured well areas and burner drip pans (some models) should be routinely cleaned.
Keeping the burner head ports and slots clean will prevent improper ignition and an uneven flame. Refer to the following sections
for further instructions.
DO NOT attempt to clean the cooktop when the
cooktop or burner heads are still hot. Touching hot cooktop
areas, burner grates and burner caps can cause burns.
Any additions, changes or conversions required
in order for this appliance to satisfactorily meet the application
needs must be made by an authorized Electrolux Distributor
or Qualified Agency.
To clean the burner head ignition ports =Each burner head has a small ignition
port located as illustrated. Should you experience ignition problems itmay be that this slots
port hole is partially blocked with soil. With the burner head inplace, use asmall wire
gauge needle or the end of a paper clip to clear the ignition port.
ignition port
To Clean the Surface Burner Heads - For proper gas flow it may be necessary to
clean the burner head and slots. To clean, first use a clean DAMP cloth to soak up
any spills. Remove any food from between the burner slots using a small non-abrasive
brush like atoothbrush and afterwards wipe up using a damp cloth. For stubborn soils
located in the slots, use a small-gauge wire or needle to clean the slots.
Please Note: The surface burner heads are secured to the cooktop and must be
cleaned in place on the cooktop.
Cooktop Burner Head
For proper flow of gas and ignition of the burner--DO NOTALLOW SPILLS, FOOD, CLEANING AGENTS ORANY OTHER
MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap and surface burner head
in place whenever a surface burner is in use.
To Clean the Recessed and Contoured Well Areas ofthe Cooktop =Ifa spill occurs on or inthe recessed or contoured areas,
blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.
To Clean the Surface Burner Grates, Caps & Surface Burner Drip Pans (some models) =Use a soap-filled scouring pad
or a mild abrasive cleanser to clean the surface burner caps and surface burner drip pans (if equipped).
Please Note: THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
9
Loading ...
Loading ...
Loading ...