Loading ...
Loading ...
Loading ...
29
i53BT User's Manual V1.1
The vehicle identification information presented is provided by the ECM of
the vehicle being tested. Therefore, certain attributes of the test vehicle must
be entered into the scan tool to ensure the data displays correctly. The
vehicle identification sequence is menu driven. Simply follow the screen
prompts and make a series of choices. Each selection you make advances
you to the next screen. Exact procedures may vary somewhat by vehicle.
It typically identifies a vehicle by any of the following means:
●
VIN Reading
●
Manual Selection
NOTE
Not all identification options listed above are applicable to all vehicles.
Available options may vary by vehicle manufacturer.
8.1 Vehicle Connection
To connect to vehicle:
1. Locate the data link connector (DLC). The DLC is generally located under
the dash on the driver side of the vehicle.
Figure 8-1 Sample Vehicle Connection Screen
2. Plug the VCI to the vehicle DLC directly.
3. Switch the ignition key to the ON position.
4. Boot up the scanner, launch the diagnostic APP and make Bluetooth
pairing of the VCI dongle and tablet.
5. Check if the connection indicator turns to green. If yes, it means the
scanner is ready to start diagnosis.
Loading ...
Loading ...
Loading ...