Dewalt DW325C INSTRUCTION MANUAL

Loading ...

• Keepbystanders,children,andvisitorsawaywhileoperating

a power tool. Distractions can cause you to lose control. When

tool is not in use, it should be locked in a safe place, out of the

reach of children.

• Remove finger from trigger when

not driving fasteners. Never carry

tool with finger on trigger. Accidental

discharge could result. Using the trigger

lock-off will prevent accidental discharge.

• Do not overreach. Maintain proper

footing and balance at all times. Loss of

balance may cause cause personal injury.

(Fig. K)

• Makesurehoseisfreeofobstructions

or snags. Entangled or snarled hoses can

cause loss of balance or footing.

• Usethetoolonlyforitsintendeduse.

Do not discharge fasteners into open

air, concrete, stone, extremely hard

woods,knotsoranymaterialtoohard

for the fastener to penetrate. Do not

use the body of the tool or top cap as

a hammer. Discharged fasteners may

follow unexpected path and cause injury.

(Fig. L)

• Always keep fingers clear of contact

trip to prevent injury from inadvertent

release of nails. (Fig. M)

• RefertotheMaintenance and Repairs

sections for detailed information on

the proper maintenance of the tool

• Always operate the tool in a clean,

FIG. P

FIG. N

FIG. O

lighted area. Be sure the work surface

is clear of any debris and be careful not

to lose footing when working in elevated

environments such as rooftops.

• Do not drive fasteners near edge

of material. The workpiece may split

causing the fastener to ricochet, injuring

you or a co-worker. Be aware that the nail

may follow the grain of the wood (shiner),

causing it to protrude unexpectedly from

the side of the work material. Drive the

nail perpendicular to the grain to reduce

risk of injury. (Fig. N)

• Do not drive nails onto the heads

of other fasteners or with the tool

at too steep an angle. Personal injury

from strong recoil, jammed fasteners, or

ricocheted nails may result. (Fig. O)

• Beawareofmaterialthicknesswhen

using the nailer. A protruding nail may

cause injury.

• Beawarethatwhenthetoolisbeing

utilized at pressures on the high end

of its operating range, nails can be

driven completely through thin or

very soft work material. Make sure

the pressure in the compressor is set so

that nails are set into the material and not

pushed completely through. (Fig. P)

FIG. K

FIG. L

FIG. M

English

Loading ...

Dewalt DW325C 15 Degree Coil Framing Nailer

INSTRUCTION MANUAL - Page 5