Loading ...
Loading ...
Loading ...
U3
Q..
!
t=-
L0
m
F=.
O
O
I
LU
._=l
O
t=-
Troubleshooting tips ... Before you call for service
Top burners do not light
or do not burn evenly.
(The front right burner
is designed to have
slightly smaller flames
between the 6 and 9
o'clock positions. This
is normal.)
Burner flames very
large or yellow
Surface burners light
but oven does not
Possible Cause What To Do
Plug on range is not completely Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet, grounded outlet.
Burner slits on the side of the Remove the burners and clean them. Check the electrode area
burner may be clogged, for burned-on food or grease. See the Care and cleaning of the
range section.
Improper burner assembly. Make sure the burner parts are installed correctly. See the Care
and cleaning of the range section.
Improper air to gas ratio.
The oven gas shut-off valve may
have accidentally been moved
during cleaning or moving.
If range is connected to LP gas, contact the person who
installed your range or made the conversion.
To check the oven gas shut-off valve, remove the drawer (see
the Care and cleaning of the range section). For lower oven
drawer models, remove the rear access panel by unscrewing
the thumb screws in the upper left and right corners. Look for
the gas shut-off lever at the back of the range.
shownclosed.\ T J
PULLTOOPEN._ /
JSealedburnermodels
I
Thumbscrews
Lowerovendrawermodels
I
Burners do not light Plug on range is not completely Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet, grounded outlet.
Gas supply not connected or See the Installation Instructions that came with your range.
turned on.
A fuse in your home may be Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
Burner parts not replaced See the Care and Cleaning of the range section.
correctly.
Drawer does not slide The drawer is out of alignment. Fully extend the drawer and push it all the way in. See the Care
smoothly or drags and cleaning of the range section.
Drawer is over-loaded or load is Reduce weight. Redistribute drawer contents.
unbalanced.
Lower broiJ drawer will A fuse in your home may be blown Replace the fuse or reset the circuit breaker.
not work or the circuit breaker tripped.
The oven is self=cleaning. Wait for the self-clean cycle to finish and the oven to cool.
Controls improperly set. See the broil drawer section.
4- 49 85209 3
Loading ...
Loading ...
Loading ...