Loading ...
Loading ...
Loading ...
TIMER FUNCTION
The appliance is fitted with a timer that will turn the unit off after the desired time
has elapsed.
You can select between 1, 2, 4, 8 hours of running time. When the selected amount
of running time has expired, the unit will turn off.
ION FUNCTION
Ionizers use electricity to create negative electrons. These electrons stream into the
air
and attract oxygen molecules. At this point, they become negative ions and are
attracted to airborne particles. These molecules build up around the particles until
they become too heavy to remain air borne and fall to the ground.
Switch the Ionizer (air purifier) On or Off when desired. The LED light will blink when
turned on.
WATER FULL
When the water tank is full, an alarm will sound 10 times. The LED light on the
control panel will illuminate, and the unit will stop operating.
The water tank must be removed, emptied and reinstalled before the unit will
operate again.
ALARM
The alarm will sound and the ALARM LED will illuminate if a malfunction is detected.
The appliance will shut down automatically if the internal temperature is too high.
Disconnect the appliance from the mains socket outlet and wait for 15 minutes
before re-connecting the appliance to the mains socket outlet and continuing with
normal operation. If the alarm fault continues; contact your authorised service agent
immediately for further advice.
EMPTYING THE WATER TANK
When the water container is full, an alarm will
sound (BEEP) ten times and the WATER FULL
L.E.D will flash. The appliance will stop dehumidifying.
DO NOT move the appliance while the tank is full as
this may lead to water spillage and create a potential
hazard.
To remove the water tank, grip the tank firmly and pull outwards. Any spillage should
be dried immediately to avoid a potential hazard.
Operating Your Dehumidifier
Loading ...
Loading ...
Loading ...