Loading ...
Loading ...
Loading ...
What to Do?
Long Periods of Disuse
If the toilet is in a location you will not visit for a long time, drain the water.
(Failure to do so may cause breakdown or skin irritation due to polluted product tank water.)
Resupplying the Water
How to drain the water
1
■
If water may get frozen
• Add antifreeze solution in the water in the bowl to prevent freezing.
(The antifreeze solution should not be fl ushed out. Collect it before using the toilet and dispose of it.)
■
To use the product again
• The water needs to be resupplied. (See below)
2
If the power is not on,
Insert the power plug.
• The "Power" LED lights up.
3
Discharge water from the wand.
(1) Pressing down the left side of the toilet seat,
(2)
Press "Rear cleansing" button on the remote control to discharge
water from the wand for about 2 minutes.
• It takes about 1 minute maximum before water comes out.
• Catch the water in a paper cup or other receptacle.
(3)
Press the "Stopping" button on the remote control.
1
Open the shutoff valve.
• Check that water is not leaking from a pipe or the main unit.
4
Drain the pipe. (Page 39 Step
5
)
*After draining the water, Keep the cover
removed.
■
If the remaining water has frozen and no water comes out
•
Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth soaked in warm water.
Tighten the water drain plug
securely with a fl at-head screwdriver
and reinstall the cover.
6
Drain the water from the toilet tank.
(Page 39 Step
1
2
)
Unplug the power plug.
3
Soft cloth soaked in water
(to prevent scratching)
Paper cup
Water drain plug
Flat-head
screwdriver
Removal of Operation Guide
How to remove the operation guide
Follow the procedure below.
1
Unplug the power plug.
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
operation guide.
Hanger Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Insert the power plug.
•
The "Power" LED lights up.
■
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
Loosen the water drain plug until water
comes out from around the wand.
• Water comes out from around the wand.
(It takes about 3 minutes to complete draining.)
* The water drain plug cannot be removed.
5
2
Extend the wand.
(Release the pressure from the water supply pipe.)
(Page 39 Step
3
)
40 41
Reference
Loading ...
Loading ...
Loading ...