Loading ...
Loading ...
Loading ...
wolfappliance.com
|
11
OVEN OPERATION
Oven Operation
CLOCK
The clock is visible on the control panel during all cooking
modes, except when the timer is in use. It is very important
the clock is set to the correct time if the cook time or stop
time feature is used. The clock must be reset after a power
outage.
Setting clock:
1 Touch CLOCK on the control panel.
2 Use the up and down arrows to set the time of day. The
time will change from am to pm by passing 12:00.
3 Touch CLOCK. A chime indicates the time has been set.
4 To change to a 24-hour clock, press and hold CLOCK for
5 seconds. Touch CLOCK, then ENTER.
CLOCK STANDBY POWER
The range is shipped in standby power mode which dis-
ables the clock approximately 10 minutes after the cooling
fan operation is complete or the oven is inactive. The clock
illuminates after any touch of the controls or oven use.
Enable/disable standby power:
1 Touch and hold CLOCK on the control panel for 5
seconds.
2 Touch STOP TIME to toggle on or off, then touch
ENTER.
TIMER
The timer can be set for a maximum of 9 hours, 59 minutes.
Once a time is set, the countdown is illuminated on the
control panel display. The last minute counts down in sec-
onds. The timer is independent from the oven. Setting the
timer does not affect cook time or stop time. For information
regarding auto program features, refer to page 14.
Setting timer:
1 Touch TIMER on the control panel.
2 Use the up and down arrows to set the time in hours and
minutes.
3 Touch TIMER to start. A chime indicates the timer has
been set. The oven chimes and the time will ashes
when complete. The timer continues to chime until
CLEAR is touched on the control panel.
Loading ...
Loading ...
Loading ...