Loading ...
Loading ...
Loading ...
- 17 -
BUTTON : LIGHT
BUTTON 0: OFF
BUTTON 1: SPEED I
BUTTON 2: SPEED II
BUTTON 3: SPEED III
BUTTON T:
AUTOMATIC STOP TIMER - 15 minutes (*)
• The appliance has the Power Boost speed function: press
BUTTON 3
for two seconds and
it will be activated for 10 minutes after which it will return to the previously set speed. When
the function is active the LED ashes. To interrupt it before the 10 minutes have expired press
BUTTON 3
again.
• By pressing
BUTTON T
for two seconds (with the hood switched o) the “cleanair” func-
tion is activated. This function switches the appliance on for ten minutes every hour at the
rst speed. As soon as this function is activated the motor starts up at the rst speed for ten
minutes. During this time
BUTTON T
and
BUTTON 1
must ash at the same time.
After ten minutes the motor switches o and the LED of
BUTTON T
remains switched on with
a xed light until the motor starts up again at the rst speed after fty minutes and
BUTTON
T
and
BUTTON 1
start to ash again for ten minutes and so on.
By pressing any key for the exclusion of the hood light the hood will return immediately to its
normal functioning (e.g. if
BUTTON 2
is pressed the “cleanair” function is deactivated and
the motor moves to the 2nd speed straight away. By pressing the
BUTTON 0
the function is
deactivated).
(*) The “automatic stop timer” delays stopping of the hood, which will continue functioning for
15 minutes at the operating speed set at the time this
function is activated.
•Activecarbon/greaseltersaturation:
- When button ashes at a frequency of 2 seconds, the grease lters must be cleaned.
- When button ashes at a frequency of 0.5 seconds, the carbon lters must be replaced.
After the clean lter has been replaced, the electronic memory must be reset by pressing
button for approximately 5 seconds, until the light on the button stops ashing.
Your XO range hood is controlled by these
electronic push buttons which illuminate when
activated.
easy to operate
Loading ...
Loading ...
Loading ...