Loading ...
Loading ...
Loading ...
REMOVABLE OVEN RACKS
Be careful not to bump or damage the oven finish when
Installlng or removing oven racks.
To install:
1. Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack a bit and push the
rack all the way in.
To remove,'
1. Pull the oven rack out, then up, in one motion. See
the cleantng chart.
BUMP
IN RACK \
GUIDE \
NOTE:
For best performance remove oven racks before a clean cycle. If oven racks are left in the
range during a clean cycle, they will darken, lose their luster and become hard to slide, if you
choose to leave the racks in the oven, you can polish the edges of the racks with steel wool
and apply a small amount of vegetable oil to the rack edges after the self-clean cycle. This
will make the racks easier to slide.
NOTE: The racks are designed with stop _ecks, When placed correctly on the rack support and
extended from _he oven, the stop lock prevents the racks from tilting when you are removing
food from the racks or placing food on them.
REPLACIHG OVEN LIGHT
Do not touch hot oven bulb. Do not
touch bulb with wet hands= Never
wipe oven light area with wet cloth.
Never touch the electrically Iive
metal collar on the bulb when re-
placing.
To remove:
1. Disconnect electric power to the oven at the main
fuse or circuit breaker or unplug the oven from the
electric outlet.
2_ Hold your hand under cover and firmly push back the
bali wire until It clears the cover. The cover will fall
Into your hand. DO NOT REMOVE ANY SCREWS
TO REMOVE THE COVER,
3. Replace bulb with 40_watt home appliance bulb.
To replace cover:
1. Placecoverinto groove of lamp receptacle. Pull wire
bail forward until it snaps into place. Be certain wire
bail is in center of cover. Wire will hold cover firmly
when In correct position.
2o Connect power to oven.
BULB SOCKET
BULB COVER BAIt. WiRE
14
NEMNT41-2
Loading ...
Loading ...
Loading ...