Loading ...
Loading ...
Loading ...
• Has the ice melted around the auger (metal spiral) in the
ice bin? Empty the ice container. Use warm water to melt the
ice if necessary.
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
• Is the ice dispenser stalling while dispensing "crushed"
ice? Change the ice button from "crushed" to "cubed." If
cubed ice dispenses correctly, depress the button for
"crushed" ice and begin dispensing again.
• Has the dispenser lever been held in too long? Ice will stop
dispensing when the arm is held in too long. Wait 3 minutes
for dispenser motor to reset before using again.
The water dispenser will not operate properly
Check the following:
• Is the freezer door closed completely?
• Is the water shutoff valve not turned on, incorrectly installed
or clogged?
• Is the water line connected at the source?
• Is there a kink in the home water source line?
• Has the water system not filled? The water system needs
to be filled the first time it is used.
• Is the refrigerator connected to a cold water line with
water pressure of at least 30 psi (207 kPa)? The water
pressure to the home determines the flow from the dispenser.
• Is there a water filter installed on the refrigerator? The
filter may be clogged or incorrectly installed.
• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements"
in either the Installation Instructions or the Use & Care Guide.
Water is leaking from the dispenser
Check the following:
• Is the glass not being held under the dispenser long enough?
• Has the water system been flushed since installation or
changing filters?
The dispenser water is not cool enough
NOTE: Water from the dispenser is chilled to only 50°F (10°C).
• Has the refrigerator been newly installed or a large
amount of water recently dispensed? Allow 24 hours for
the refrigerator to cool completely.
• Has water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.
ACCESSORIES
To order replacement filters, call 1-800-442-9991 and ask for the
appropriate part number listed below or contact your authorized
KitchenAid dealer. In Canada, call 1-800-807-6777.
Stainless Steel Cleaner and Polish:
Order Part #4396920
Standard Filter:
Order Part #4396711 (T1RFWB2)
WATER FILTER
CERTIFICATIONS
TrademarldModel Designation
Whirl F !ol Advanced T1WFI2
Whirlpool Advanced T I x,VB2L
State of California
Department of Health Services
Water Treatment Device
Certificate Number
04- 1635
Date Issued: April 8, 2004
Date Revised Aprd 6, 2005
Reolacement Elements
Cysts
Turbidity
Organic t_'ont llminailtS
Alachlor
A(razme,
Benzene
o-Dlchch)orobenzev_
Endrm
['thylbenzene
I indane
Monochlorobenzene
l'etrachloroethylene
Toxaphcne
Mer,-m-y
Rated Service Capacity: 2fX} gals Rated Service Flow: 05 gpm
( onditions of Certification:
Do not use where water is microbiotogically unsafe or with water of unknown quality, except that systems certified for
cyst reductiun may be u_cd on disinfected wa_ex's that may contain fiherable cysts
Loading ...
Loading ...
Loading ...