Loading ...
Loading ...
Loading ...
i ,:::::: ....: ;;::::::: _ ::_:::: ::::::::::: :::: ::: :: : _ _ _: _ :: _ : .:.:?:._:::T:.::,_:.:::.:.:::T:.:.:::.:.:.::T:,-:-:'::': '¸ ::::.:.:.:.:::..:.:.::::.:::::T:T..T:T:T;.:.::!.:.:::---:-:.:.:._.:::::: ¸ --:::::.:.:.:i::: -:|
I
Review this chart to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed at a Sears
service center,
so couldresultin electrical shock or personal injury.
Cleanerwonl run.
Poorjob of dirtpick-up.
Cleaner picks up
moveablerugs or
pushestoohard.
Agitatordoes notturn.
Performanceindicator,
somemodels,is red.
Air flow restricted
witt_attachmentuse.
Soundchanges.
1. Unplugged at waltoutlet.
2, Tripped circuit breaker/blown fuse
at household service panel.
3. On/off switch not turnedon.
4, Thermal protector tripped.
1. Full or clogged duel bin.
2. Wrongpileheightset_ng.(somemodels
3. Worn agitator.
4. Clogged nozzle or dust bin port.
5. Clogged hose,
6. Hole in hose.
7. Broken/misplaced bell.
8. Hose not inserted fully.
9. Motor protectionsyslem activated,
10. Dirty filters.
1. Wrongpileheightsetling.(somemodels)
1. Broken bell.
2, Belt installedincorrectly.
1, Full orcloggeddust bin.
2. Dirty fillers.
3. Clogged airflow passage.
4. Cerlale altachment tools.
1, Attachment use restricts air flow.
2, New carpel fuzz clogged air path.
1. Plugin firmly, pushon/off switch to on.
2. Reset circuit breaker or replace fuse.
3. Push on/off switch to on.
4. Reset thermal protector, (page 11)
1. Clean dust bin, (pages 13, 14).
2. Adiusl setting, (page 7).
3. Replace agitator, (page 19)
4. Check CLOG REMOVAL, (page 18).
5. Check for clogs, (page 18).
6. Replace hose.
7. Replace/fix belt, (pages 16, 17).
8. Insert hose fully, (page).
9. Check forclogs. (page 18).
10. Clean/change filters, (page 15).
1. Adjustsetting, (page 7).
1, Replace belt, (pages 16, 17).
2. Check BELT CHANGING AND
AGITATOR CLEANING, (pa_les 16.17).
1, Clean dustbin, (pages 13, 14).
2. Clean/change tilters. (page 15).
3. Clear clog from airflow passage,
(page 18).
4. This isnormal, Light should go off
when tool is removed.
1, Check ATTACHMENTS, (page 9).
2. Check CLOG REMOVAL and clean
hose. (page 18).
20
Loading ...
Loading ...
Loading ...