Loading ...
Loading ...
Loading ...
10
CLOSEMOUNT INSTRUCTIONS
13. Remove the canopy cover from the bottom of the
canopy (Fig. 13)
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).
Canopy
Canopy
Hook
Canopy
Cover
Fig. 13
Fig. 15
Closemount Screw
Fig. 14
14. Remove the three closemount screws and washers
from the top of the motor housing. Align the canopy
with the closemount screw holes in the top of the
motor housing. Secure the canopy to the top of
the motor housing by reinstalling the closemount
screws and washers into the top of the motor
housing (Fig. 14).
Spring Washer
Closemount
Screws
Spring
Washer
Loading ...
Loading ...
Loading ...