Loading ...
Loading ...
Loading ...
-7-
INSERTING AND RELEASING
BATTERY PACK
Release battery pack from tool by pressing on
both sides of the battery release tabs and pull
downward (Fig. 1).
To insert battery, align battery and slide
battery pack into tool until it locks into position.
Do not force.
If battery release tabs are
cracked or otherwise
damaged, do not insert into tool. Battery can
fall out during operation.
Assembly
Operating Instructions
PROTECTION AGAINST DEEP
DISCHARGING
The lithium ion battery is protected against
deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is
empty, the cordless worklight is switched off
by means of a protective circuit.
TURNING THE WORKLIGHT ON
To turn the worklight ON, press the On/Off
switch. To turn worklight OFF, press the
On/Off switch (Fig. 1).
Do not continue to
press the On/Off switch
after the cordless worklight has been
automatically switched off. The battery can
be damaged.
RUN TIME
The run time will depend - in part - on the
Bosch battery capacity.
POSITIONING THE WORKLIGHT
The cordless worklight can be used standing
up or lying down. Its hexagonal shape
enables the light to be in any of six angles as
needed (Fig. 2).
It can also be hung using the utility hook
(Fig. 3).
Battery Ah Run Time Up To
1.0 Ah 3.0 Hours
1.5 Ah 4.5 Hours
2.0 Ah 6.0 Hours
2.5 Ah 7.5 Hours
4.0 Ah 12 Hours
FIG. 2
FIG. 3
2610047945 07-17 GLI12V-300_GLI12V-300 7/11/17 11:05 AM Page 7
Loading ...
Loading ...
Loading ...