Loading ...
Dwg Name: 139168ART Dwg No: 139168
ECO No: 041270 Pkg Dwg Ref: 1658 Rev: I
Color Reference: Gloss – ENG000879-3
CLEANING:
1. Use the Klein Grip Cleaning Wire Brush (Cat. No. 25450) or emery cloth to
clean the surfaces of grip jaws.
2. Spray cleaner-degreaser on the grip jaws, all joints and all moving parts.
3. Use the Klein Grip Cleaning Wire Brush to remove dirt and debris from jaws.
4. Wipe grips dry with soft cloth.
Repeat all steps until grip is completely clean.
NOTE:
Aluminum strand conductors may have a die-grease coating which can deposit
on grip jaws. New aluminum conductors should be wiped clean before grip application.
Grip jaws should be wiped clean of grease before use.
LUBRICATING:
Lubricate all joints and moving parts.
DO NOT LUBRICATE GRIPPING SURFACES OF JAWS.
STORAGE:
Always store grip in a dry, cool place.
INSPECTION:
Carefully inspect jaw condition, proper aligment of jaws and all parts, and possible
distortion caused by exceeding safe-load specifications. Grips should operate smoothly.
Spring-loaded grips should lock open with loop handle in “Down” position and should
close automatically with loop handle “Up.” The Klein parallel jaw grip may be tested by
opening and closing the jaws by hand, exercising proper caution. All parts and rivets
should be checked for distortion.
NEVER ATTEMPT TO REPAIR OR MODIFY ANY GRIP.
Grips that are bent,
misaligned, or otherwise distorted should be discarded and replaced. If there is ever any
question about the safe condition of any grip, please contact Klein Tools directly
at 1-844-395-3235 or 1-800-KLEIN76.
KLEIN TOOLS, INC
Mansfield, TX USA
© 2021 139168 Rev. 08/21 I
www.kleintools.com
WARNING: Cancer and reproductive harm – See www.P65Warnings.ca.gov for more information.
Utility Grips Maintenence Hang Tag - MASTER.indd 2Utility Grips Maintenence Hang Tag - MASTER.indd 2 8/27/21 11:28 AM8/27/21 11:28 AM
Loading ...
Loading ...
Loading ...