Poulan Pro PB22H48YT Poulan tractor

User Manual - Page 17

For PB22H48YT.

PDF File Manual, 30 pages, Download pdf file

Loading ...
Loading ...
Loading ...
MAINTENANCE
IN=LINE FUEL FILTER (See Fig. 16)
The fuel filter should be replaced once each season. If fuel
filter becomes clogged, obstructing fuel flow to carburetor,
replacement is required.
With engine cool, remove filter and plug fuel line sec-
tions.
Place new fuel filter in position in fuel line with arrow
pointing towards carburetor.
LAMP
FUEL FILTER__
FiG. 16
Be sure there are no fuel line leaks and clamps are
properly positioned.
Immediately wipe up any spilled gasoline.
CLEANING
Clean engine, battery, seat, finish, etc. of all foreign
matter.
Keep finished surfaces and wheels free of all gasoline,
oil, etc.
Protect painted surfaces with automotive type wax.
We do not recommend using a garden hose or pressure
washer to clean your tractor unless the engine and trans-
mission are covered to keep water out. Water in engine or
transmission will shorten the useful life of your tractor. Use
compressed air or a leaf blower to remove grass, leaves
and trash from tractor and mower.
SERVICE AND ADJUSTMENTS
WARNING: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST=
MENTS:
= Depress brake pedal fully and set parking brake.
= Place attachment clutch in "DISENGAGED" position.
Turn ignition key to"STOP" and remove key.
Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
TRACTOR (See Fig. 17)
TO REMOVE MOWER
Place attachment clutch in "DISENGAGED" position.
Lower attachment lift lever to its lowest position.
Disengage belt tension rod (K) from lock bracket (L).
I_ CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rodand
release slowly.
Remove mower belt from electric clutch pulley (M).
Disconnect front link (E) from mower- remove retainer
spring and washer.
Go to either side of mower and disconnect mower
suspension arm (A) from chassis and rear lift link (C)
from rear mower bracket (D) - remove retainer springs
and washers.
Go to other side of mower and disconnect the suspen-
sion arm and rear lift link.
03069
FIG. 17
17
Loading ...
Loading ...
Loading ...