Loading ...
Loading ...
3
Operating Instructions and Parts Manual 25090
5/19
2019 OEMTOOLS
™
HARMONIC BALANCER
PULLER KIT
5. The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
6. In addition to these guidelines, always follow the
manufacturer’s recommended procedures when
servicing each unique vehicle.
DISPOSAL
At the end of the useful life of the OEMTOOLS
™
Harmonic
Balancer Puller Kit, dispose of the components according
to all state, federal, and local regulations.
PURPOSE
The Harmonic Balancer Puller Kit is designed to remove
the harmonic balancer on many popular GM, Mitsubishi,
and Chrysler engines with spoked pulleys (often without
needing to remove the radiator).
OPERATING INSTRUCTIONS WARNING
Ensure that you read, understand and apply safety
instructions before use.
1. Determine which Insert Rod will work best to remove
crankshaft pulley.
2. Install the appropriate Insert Rod into the crankshaft.
3. Attach the 3-jaw puller to the damper and line up the
forcing screw with the insert.
4. Tighten the forcing screw onto the puller to push
against the insert.
5. Remove the crankshaft damper.
MAINTENANCE WARNING
Before each use, inspect the Harmonic Balancer Puller
for damage. DO NOT use if bent, broken, cracked,
leaking or otherwise damaged components are noted.
Periodically, lightly oil all moving parts, including the
pump piston and ram.
Figure Description Qty.
1 Puller Body 1
2 Puller Jaw 3
3 Jaw Retaining Pin 3
4 Wave Washer (Not Shown) 3
5 Pressure Screw 1
6 Insert Rod 4" 1
7 Insert Rod 5-13/32" 1
8 Insert Rod 6-1/2" 1
9 Insert Rod 7-13/32" 1
PRODUCT COMPONENTS
(9)(5) (8) (7) (6)
(1)
(2)
(3)
Loading ...