Loading ...
Loading ...
Loading ...
Thor Kitchen Gas Rangetop
16
SURFACE BURNER IGNITION
To light the top burners, push and turn the appropriate control knob counterclockwise to the
“HI” position. You will hear a clicking noise the sound of the electric spark igniting the burner.
Once burner ignition has been achieved, then turn the burner control knob to adjust the desired
heat setting.
NOTE: When one burner is turned to the “HI” position, the burner igniters will park. Do not
attempt to disassemble or clean around any burner while another burner is on. Do not touch
any burner cap, burner base, or igniter while the igniters are sparking.
FOR THE MODELS WITH GRIDDLE
Before Using the Griddle
1. Clean the griddle thoroughly with warm, soapy water to remove dust or any protective coating.
2. Rinse with clean water and wipe off to dry with soft, clean, lint-free cloth.
3. A stainless-steel cover that is sized to fit on top of the surface when the griddle is not
being used is provided. Please note that the cover must be removed before turning the
griddle on.
4. Make sure the grease tray is under the front edge of the griddle. Position the tray under
the griddle overhang to catch grease or food residue.
Use of the griddle
1. Push and turn the control knob counterclockwise to the preferred cooking temperature.
2. Preheat the griddle for at least 15 minutes. The LED light above the griddle knob (griddle light) will be
turning on when the griddle burner is on.
3. When the griddle is preheated to the desired temperature, the griddle light will be turning off. The
Griddle light cycles on and off like the oven cycling light. It’s not a pre-heat light.
4. The front of the griddle will be cooler than the back. Rear of griddle is cooking area while the front of
griddle if for warming area.
5. Butter or cooking oil could be added to the surface of the Griddle.
Loading ...
Loading ...
Loading ...