Loading ...
Loading ...
Loading ...
5
With the tool connected, perform a quick self-test. The power switch
is a momentary rocker switch located on the tool's body. Flanking the
switch are positive and negative markings.
Press the Power Switch forward to activate the tip with a positive
voltage. The Red LED should light and the LCD display will read
the battery voltage. If the tone feature is turned on, a high pitched
tone will sound. Let go of the power switch and the LED will turn
off and the high tone will cease.
Press the Power Switch rearward to activate the tip with a negative
voltage. The Green LED should light and the LCD display will read
the „0.0V‟ (ground). If the tone feature is turned on, a low pitched
tone will sound. Let go of the power switch and the LED will turn
off and the low tone will cease.
Your tool is working correctly and is now ready for use. (Figure 1)
Figure 1
IMPORTANT: When powering-up components, you can increase
the life of power switch in the tool if you first press the switch, then
Loading ...
Loading ...
Loading ...