Smeg SE495ETD Ceramic Hob 90 cm

User manual EN pdf - Page 9

For SE495ETD.

PDF File Manual, 19 pages, Download pdf file

Loading ...
Loading ...
Loading ...
USE - 3191477B059/A
e
USE
Preliminary operations
Remove any protective film from the outside
or inside of the appliance, including any
accessories (if present).
Remove any labels (apart from the technical
data plate).
Basic functions
First power connection
When connected to the power supply for the
first time, or after power has been switched
back on after a power failure, an automatic
check is carried out that control turns on the
indicator lights and the displays for a few
seconds. Afterwards, the appliance can be
used normally.
Switching on and off
To switch on the hob, hold down the ON/OFF
key for 1 second.
If no cooking zone is activated within 5 seconds
of switching on, the hob switches off
automatically.
Using the hob
Switching the cooking zones on
1. After switching the hob on, all displays show
the symbol .
2. Select the wished cooking zone.
3. Press the Increase and Decrease
keys to increase or decrease the required
power level.
Switching on the double/triple cooking zone
(on some models only)
1. After selecting a zone and pressing the
multiple zone key an additional
cooking zone will be activated, if any. On
the display, a lighted dot comes on beside
the power setting to indicate that the double
cooking zone has switched on.
2. Pressing the multiple zone key a second time
will activate an additional cooking zone, if
any.
Adjusting the cooking zones
After placing a pan and ensuring that the zone
has been activated:
1. Place a finger on the left-hand side of the
scroll bar of the cooking zone to be used.
2. Move your finger to the left or right to select
the power level from 1 to 9, or activate the
Booster function (see dedicated chapter).
The display of the zone being used will indicate
the selected power level.
Front right
See General safety instructions.
When the cooking zone is off ( ), it
cannot be activated by pressing the
Decrease key .
The power level can also be selected
by directly pressing the scroll bar,
approximately at the point
corresponding to the desired power
level.
Loading ...
Loading ...
Loading ...