Loading ...
Loading ...
Loading ...
34
INSTALLATION
Check the appliance is electrically safe when you have nished.
3-Wire Conduit Installation
Disconnect the supplied power cord from the terminal block
and ground post. Keep the terminal block parts; you will need
them. Remove the strain relief clamp from the power cord
and remove the power cord and strain relief clamp from the
mounting bracket.
Fit a squeeze connector (not supplied with the range), to your
conduit. Insert the conduit through the reducer plates on the
mounting bracket. Allow enough slack to easily attach the
wires to the terminal block.
NOTE: Do not install the conduit without a squeeze
connector.
A Ground strap is supplied in the conversion pack (Fig. 11.5).
Fit the Ground strap to the ground and center terminal of the
connector block.
The neutral or ground wire of the power cord must be
connected to the neutral terminal located in the center of the
connector block. The power leads must be connected to the
outside terminals (Fig. 11.6).
NOTE: Make sure the wires are completely inserted into
the terminals and secure connections are made.
Secure the squeeze connector in place in the bracket by
tightening the squeeze connector screws.
Ret the electrical connection cover.
Black
Red
White: Neutral
Ground strap
Fig. 11.5
Fig. 11.6
Loading ...
Loading ...
Loading ...