Loading ...
Loading ...
INFLATE TIRES
1. Screw valve connector onto tire's valve stem.
2. Plug power cord into 12 volt accessory power outlet.
3. Set target pressure value
4. Press on/off switch.
5. The inflator will stop at the pre-set value.
6. Press on/off switch again.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side
door jamb.
DIGITAL GAUGE OPERATING INSTRUCTIONS:
1. Hold the "+" or "–" button for approximately 5 seconds until the display flashes.
Set the required pressure using the "+" or "–" buttons, then wait 2–3 seconds. The
display will show the pressure value to which the tire will be inflated.
2. Push the ON/OFF button for the inflator to start. When the pressure gauge reach-
es the pre-set value, the inflator will automatically switch off.
3. The ON/OFF button can be used to override the present pressure value if required.
Loading ...
Loading ...
Loading ...