Using the anti-theft device
At the bottom of the stem is a built-in anti-theft device in the form of
a steel cable that can be locked with a numerical code.
1. Locking head
2. Anti-theft cable
3. Anti-theft cable storage space
4. Lock
5. Locking button
6. Dials
7. Code reset button
The default anti-theft device unlock code is: 0-0-0-0
1. Unlock the anti-theft device (default code 0000)
2. Slide the reset button to the right (SET mode)
3. Set a new code by turning the dials
4. Slide the reset button to the left
To attach the scooter to afixed support:
1. Pull on the anti-theft cable
2. Press the unlock button
3. Insert the cable head in the lock
4. Turn the dials to lock the anti-theft device
To remove the scooter from a fixed support:
1. Enter the safety code
2. Press the unlock button
3. Pull the cable out of the lock
4. Stow the cable in the stem tube
After use, to store the cable, push up on the cable of the anti-theft device into
the stem tube and secure
the cable head in the storage bracket to prevent it from hanging down and
getting caught in the wheel.
3
1
2
4
5
6
7
Switch Gear
The default gear is gear 1 when you power the scooter on, the screen displays L1. The maximum
speed of Gear 1 is 15.5 MPH. Switch to the gear 2 by pressing the button "+", and the screen d
isplays L2. The maximum speed of Gear 2 is 20MPH. When it is in the gear 2, press the button "-"
of the console to switch to the gear 1, and the screen will display L1.
G MAX ULTRA
