Loading ...
Loading ...
Loading ...
6
To install bits:
Lock forward / neutral / reverse switch on the tool by placing the direction of rotation
selector in neutral position. Pull the chuck sleeve away from the driver.
Push the bit into the chuck, release the chuck sleeve to lock bit into place.
Pull on the bit to make sure it is secured in the chuck. It's normal to have a small gap
for bit installation.
NOTE:
Only use bits with quick connecting locking groove.
To remove bits:
Lock the trigger by placing the rotation selector in the neutral position.
With the nose of the tool pointed away from you, pull the chuck sleeve away from the
driver. Remove the bit from the chuck.
CAUTION:
The screwdriver is not designed to be used as a drill.
Forward/Reverse switch & Trigger lock
OPERATION
Loading ...
Loading ...
Loading ...