Loading ...
Loading ...
Loading ...
7
Hints for Great Tasting Iced Tea
1. A clean Iced Tea Maker is essential for making great tasting iced tea. Regularly clean
the Iced Tea Maker as specied in the “Cleaning & Maintenance” section. Always use
fresh, cold water in the Iced Tea Maker prior to brewing.
2. Store tea leaves and tea bags in a cool, dry place. After opening a package of tea,
reseal it tightly or place into an airtight container. DO NOT store tea near spices or
strong smelling items as this could aect the avor of the tea.
3. DO NOT reuse tea leaves or tea bags after brewing as avor can be lost.
4. If tea is too bitter, a pinch of baking soda can be added to the pitcher prior to brewing.
This will smooth out the avor and neutralize the tannins in the tea. It will also remove
any cloudiness when storing the pitcher of iced tea in the refrigerator.
Brewing Iced Coee
Iced Coee can also be made using the Capresso Iced Tea Maker. In order to avoid a
coee taste when brewing tea, we suggest to purchase a separate permanent lter to use
for coee only brewing. Follow the instructions for Brewing Iced Tea above but replace
tea with 8 - 12 Tablespoons of medium ground coee (for drip coee makers).
Cleaning & Maintenance
CAUTION: Be sure to unplug the appliance and allow it to cool down before cleaning. To
protect against electrical shock, do not immerse cord, plug or unit in water or liquid. After
each use, always make sure plug is rst removed from wall outlet.
1. Clean all detachable parts after each use in hot, soapy water. (Picher, pitcher lid and
brew basket can also be washed in the dishwasher.) Make sure the drip-stop in the
lter holder is free of any particles; otherwise it might not close properly when
removing the pitcher. Clean the permanent lter and pitcher after each use to ensure
best tasting iced tea every time.
2. Wipe the product’s exterior surface with a soft, damp cloth to remove stains. Never
use scouring agents or harsh abrasive cleaners.
3. Use a damp cloth to gently wipe the heating platform. Never use abrasive cleaner to
clean the heating platform.
4. Dry all parts fully before placing back into the machine.
Loading ...
Loading ...
Loading ...