Makita XTK01Z 36V 18V X2 LXT Hot Water Kettle, Tool Only

User Manual - Page 11

For XTK01Z.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
11 ENGLISH
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection rst. If you nd a problem that is not explained in the manual,
do not attempt to disassemble the machine. Instead, ask Makita Authorized Service Centers, always using Makita
replacement parts for repairs.
Symptom Probable cause Remedy
Not working. Battery cartridges are installed improperly. Install the battery cartridges as described
in this manual.
The battery cartridges are exhausted. Charge the battery cartridges.
The appliance turns o󰀨 with beep sound
soon after turning on the appliance.
The temperature sensor detects high
temperature because the power switch has
been pressed right after boiling.
Leave the appliance o󰀨 for few minutes to
cool the appliance.
The appliance turns o󰀨 with the power
switch blinking in orange soon after turning
on the appliance.
The terminal of the temperature sensor
is dirty.
Wipe o󰀨 the dirt on the temperature sensor
using dry cloth.
The power supply stand is tilted or placed
on unstable surface.
Put the appliance on the stable, level and
at surface.
Though the boiling operation has not
nished, the appliance turns o󰀨 with a few
seconds of beep sound just like when the
boiling is nished.
The terminal of the temperature sensor
is dirty.
Wipe o󰀨 the dirt on the temperature sensor
using dry cloth.
The kettle is not sitting on the power supply
stand properly because dust or similar is
caught between the kettle and the power
supply stand.
Remove any dust on the bottom of the
kettle or on the power supply stand.
The power switch does not stop blinking
in red.
(And the power switch turn o󰀨 about 10
minutes after.)
Power supply connector on the kettle and/
or the power supply stand is dirty.
Remove the battery and wipe o󰀨 the dirt
on the power supply connector using dry
cloth.
Boiled water spills out. Water is lled exceeding the maximum
line.
Reduce water below the maximum line.
Anything other than water is lled in the
kettle.
Do not boil anything other than water.
Smells of the boiled water. Chlorine in tap water may smell.
Smell of resin just after unpacking will fade away in time.
Drops of the water on the power supply
stand.
Dew condensation may occur on the appliance because of the vapor of the boiled water.
Boiled water leaks when the kettle is tilted. There's opening on the spout. Even if the open-lid button is in locked position, the water
leaks out when the kettle is tilted.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita appli-
ance specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Makita genuine battery and Makita authorized
charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
di󰀨er from country to country.
MAKITA LIMITED
WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
Loading ...
Loading ...
Loading ...