Loading ...
Loading ...
Loading ...
en Accessories
6
6  Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page10
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.neff-international.com
Accessories Order number
Standard odor filter Z5135X1
Standard recirculation kit Z5135X3
Clean Air Plus air recircu-
lation set
Z51IXC1X6
Clean Air Plus odor filter
(replacement)
Z51IXB1X6
LongLife air recirculation
set
Z51ITD1X1
Long Life odour filter (re-
placement)
Z51ITP0X0
7  Basic operation
7.1 Switching on the appliance
Press
⁠.
a The appliance starts at fan setting 1.
7.2 Setting a fan level
Press
⁠, ⁠or ⁠.
7.3 Switching off the appliance
Press
⁠.
Note:If the fan is running at level 2 or 3, press
twice.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
⁠.
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
Note:You can switch on the intensive mode directly in
off-mode. Once the sixminutes has elapsed, the appli-
ance is switched off again.
7.5 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
1.
Switch on fan setting 1, 2 or 3.
2.
Press and hold
⁠.
a The fan run-on is activated; the button for the set fan
setting flashes.
a The appliance automatically switches off after ap-
prox.30minutes.
7.6 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press and hold
⁠.
a The interval ventilation is activated, flashes.
a The interval ventilation switches off after 24hours.
7.7 Switching off interval ventilation
Press and hold
or press ⁠.
7.8 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
⁠.
7.9 Setting the brightness
Press and hold
until the required brightness is
reached.
7.10 Switching off the lighting
Press
⁠.
7.11 Saturation indicator
The saturation indicator informs you when the grease
filters need to be cleaned.
After cleaning the grease filters, you should reset the
saturation indicator.
Resetting the saturation indicator
Requirement:The appliance is switched off.
Press and hold
for threeseconds.
a The saturation indicator is reset.
a
goes out.
Loading ...
Loading ...
Loading ...