Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/23285571-pdu3xevsrhwb/bg51.png)
81
4. Telnet/SSH Console
1- Name
2- Description
3- Primary Address
4- Primary Port
5- Secondary Address
6- Secondary Port
7- Interval
8- Retries
9- Enabled
A- Apply Changes
C- Clear Auto Probe
X- Auto Probes
M- Return to Main Menu
<ENTER> Refresh Menu
Menu Data
Probe Detail
Multiple probes may be defined to perform a selected action, such as verifying network connectivity or turning on/off a specified outlet.
• Name
This is an editable string for naming the probe
• Description
This is an editable string for describing the probe
• Primary Address
This is the primary IPv4 address to which the probe will be sent.
• Primary Port
This is the port associated with the primary address.
• Secondary Address
This is the secondary IPv4 address to which the probe will be sent.
• Secondary Port
This is the port associated with the secondary address.
• Interval
This defines how often, in minutes, the probe will be sent.
• Retries
This is the number of times that the probe request fails before considering the test to be a failure.
• Enabled
This enables or disables the probe
Note: For a Ping Probe, Ports (Primary and Secondary) are not required.
Add New Probe
Below is an example of creating and enabling an NTP probe
-------- Auto Probes ----------------------------------------------------------------------
-----------------------------------------------------------------------------------------
# | Name | Type | Primary Address | Interval | Retries | Status
-----------------------------------------------------------------------------------------
1 Ping Watchdog Ping 10.22.0.1 3 5 Okay
2 NTP Watchdog NTP 10.22.0.2 15 3 Fault
3 Probe 3 NTP 10.22.0.5 3 5 InitFl
4 Probe 4 NTP 10.22.0.6 15 4 Okay
#- Auto Probe
0- Add New Auto Probe
X- Remote Services
M- Return to Main Menu
<ENTER> Refresh Menu
>> 0
Loading ...
Loading ...
Loading ...