Loading ...
Loading ...
Loading ...
10
ASH VACUUM OPERATION
1. Make sure all parts are in place.
Never use ash vacuum without the lter in place.
Never use ash vacuum without the metal nozzle or crevice tool in place.
2. Make sure the on/off switch is in the "O" (OFF) position (Fig. 1).
3. Plug the power cord into the outlet, then turn on the ash vacuum by ipping the switch to the "I"
(ON) position (Fig. 2 & 3).
4. Run the unit for 30 seconds after you have nished cleaning your stove or replace to ensure all
materials are safely captured in the collection tank.
5. Once you have nished vacuuming, ip the switch to the "O" (OFF) position and unplug the cord
from the power outlet.
WARNING
:
BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION
ENTITLED ‘IMPORTANT SAFETY INSTRUCTIONS’. DO NOT VACUUM IN AREAS
WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR.
FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER
FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL,
OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO:
COAL, MAGNESIUM, GRAIN, OR GUN POWDER. TO REDUCE THE RISK OF HEALTH
HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
POLARIZED PLUG
To reduce the risk of electrical shock, this ash vacuum has a polarized plug (one blade wider than
the other). This plug will t in a polarized outlet only one way. If the plug does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied electrician to install the proper
outlet. Do not change the plug in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
21
3
O
I
O
I
Loading ...
Loading ...
Loading ...