Loading ...
Loading ...
Loading ...
5
Features
Rear Panel
1. Rear Port: The rear port enhances the
bass generated by the woofer,
increasing the low frequencies. Make
sure these ports are not obstructed
since this will adversely affect bass
response.
2. Bluetooth Button: Press this button to
disconnect a paired Bluetooth device
and enter pairing mode. See Pairing a
Bluetooth Device for more information.
3. RCA Inputs: Use the included audio
cable or other RCA cables (sold
separately) to connect external sound
sources to these inputs.
4. 1/4" (6.35 mm) TRS Inputs: Use 1/4”
(6.35 mm) audio cables (sold
separately) to connect external sound
sources to these inputs.
5. 1/8” (3.5 mm) TS Output to Passive
Speaker: This is the audio connection
to the passive speaker. Use the
included 1/8” (3.5 mm) TS inter-
connection cable to connect the active
speaker to the passive speaker.
6. 1/8” (3.5 mm) TS Input from Active Speaker: Use the included 1/8” (3.5 mm) TS
interconnection cable to connect the active speaker to this passive speaker.
7. Active Speaker Position: Adjust this to set the position for the active speaker in the
stereo field. This allows you to choose to have the active speaker on either your left or
right depending on your preferences and where your connections are.
8. High EQ: Turn this knob to boost or cut the high-frequency equalization of the speakers.
9. Low EQ: Turn this knob to boost or cut the low-frequency equalization of the speakers.
10. Power Connector: Plug the included 2-prong IEC power cable here.
Tip/Hot
Ring/Cold
Sleeve/Ground
Tip/Signal
Sleeve/Ground
TRS
Connector
TS
Connector
1
1
2
3
4
8
7 9
6
5
Loading ...
Loading ...
Loading ...