Loading ...
Loading ...
Loading ...
05
Cleaning
• After each use of the main engine tank, clean the residual fouling with
• Add 1.0L water and 2 tablespoons citric acid into the tank of the main
engine, without covering the head component, boil water for about 30
minutes after electrifying, then pour out the water and use it to clear
Rinse with water. If scale cannot be removed at one time, the above
method can be repeated for cleaning.
months.
• Head assembly shakes or water ovelows during water boiling
1. The water in the main engine tank exceeds the maximum water level
mark.
2. If the head assembly is not installed properly with the host, it needs to
should be properly felt by hand.
3. The sealing ring of the head assembly is not installed properly, so it
needs to be taken out and reinstalled.
replace the outlet nozzle or clean the outlet nozzle.
Common Exceptions and Handing
• No distilled water dripping
1. The host power supply and head power socket are not plugged in
place, please check and plug again.
3. There is no water in the main engine tank.
• Insucient distilled water is produced each time
1. The water in the main engine tank does not reach the maximum water
level mark.
2. If the sealing ring of the head assembly is missing or poorly sealed,
check and reinstall the sealing ring or replace it with a new one.
3. There is no water in the main engine tank.
4. The water outlet nozzle of the machine head is poorly installed and
needs to be removed and reinstalled.
last for 2 hours and 10 minutes. When setting the temperature, you can
value. The machine will enter the heating state 3 seconds after stopping
the setting.
Loading ...
Loading ...