Loading ...
Loading ...
Loading ...
PROGRAMMING
NOTICE: If this Security.l_ garage door opener is operated with a non-rolling code transmitter, the technical
measure in the receiver of the garage door opener, which provides security against code-theft devices, will be
circumvented. The owner of the copyright in the garage door opener does not authorize the purchaser or
supplier of the non-rolling code transmitter to circumvent that technical measure,
Your garage door opener has already been programmed at the factory to operate with your hand-held remote
control, The door will open and close when you press the large push button,
Below are instructions for programming your opener to operate with additional Security+ ® remote controls,
To Add or Reprogram a Hand-held Remote Control
USING THE "LEARN" BUTTON USING THE PREMIUM CONTROL CONSOLE
1, Press and release the "learn"
button on the motor unit. The learn
indicator light will glow steadily for
30 seconds.
1. Press and hold the button on the
hand-held remote* that you wish
to operate your garage door,
2, Within 30 seconds, press and hold
the button on the hand-held
remote* that you wish to operate
your garage door.
3. Release the button when the motor
unit lights blink, It has learned the
code, If light bulbs are not
installed, two clicks will be heard.
//
2. While holding the remote button,
press and hold the LIGHT button
on the Premium Control Console,
3. Continue holding both buttons
while you press the push bar on
the Premium Control Console (all
three buttons are held).
4. Release buttons when the motor
unit lights blink, It has learned the
code. If light bulbs are not
installed, two clicks will be heard,
To Erase All Codes From Motor
Unit Memory
To deactivate any unwanted remote, first erase all
codes:
Press and hold the "learn" button on /
motor unit until the learn indicator light
goes out (approximately 6 seconds). All [
previous codes are now erased,
Reprogram each remote or keyless
entry you wish to use,
35
*3.Function Remotes
If provided with your garage door opener, the large
button is factory programmed to operate it. Additional
buttons on any _ _.__
Security+ ® 3-Function
remote or compact
remote can be ,_ ,
programmed to operate
other Security+ ®garage
door openers.
Loading ...
Loading ...
Loading ...