Loading ...
Loading ...
Loading ...
25OPERATION
ENGLISH
Freezer Icemaker (Craft Ice
TM
)
This feature is only available on some models.
a Feeler Arm
CAUTION
• Do not insert round ice into the in-door ice bin,
as it can damage the ice and water dispenser.
NOTE
• The icemaker begins producing ice
approximately 48 hours after the appliance is
initially installed. The first batches of ice may not
be round and clear.
• Following installation or water filter
replacement, the first few batches of ice may be
semicircular or contain air bubbles.
• If the water pressure is less than 20 psi (138 kPa)
or a reverse osmosis system is used, the shape
of the ice may vary.
• The ice may look cloudy depending on the water
quality in the installation location and the
operating conditions.
• Throw away any shards of ice you may find in the
ice bin, as they may stick to the ice stored in the
ice bin.
• After a short-term power outage, it will take
longer to make the first batch of ice, and the ice
may not be round. If the power will be out for a
longer period, throw away the ice stored in the
ice bin.
•The Craft Ice icemaker produces 1 batch of
round ice (3 pieces) at a time.
•In 3 ICE mode, the Craft Ice icemaker produces
1 batch of round ice (3 pieces) about every 24
hours. In 6 ICE mode, the Craft Ice icemaker
produces 2 batches of round ice (6 pieces total)
in the same period.
• For more ice, select the 6 ICE mode. For clearer
ice, select the 3 ICE mode.
• The time needed to make ice may vary according
to operating conditions.
• The ice bin stores 20 - 30 pieces of round ice.
Turning the Icemaker On/Off
To turn icemakers On/Off, refer to Control Panel in
the Operation section.
en-us_main.book.book Page 25 Friday, February 10, 2023 11:43 AM
Loading ...
Loading ...
Loading ...