Loading ...
Loading ...
Loading ...
©American Audio® - www.AmericanAudio.us - ELS15 BT - Instruction Manual Page 7
ELS15 BT Rear Panel Controls and Features
Rear Panel:
1. LCD - This screen will display all relevant information about the functions being selected or the
Mp3 le being played.
2. REPEAT/EQ BUTTON - Press this button once to activate repeat, which will repeat the cur-
rently playing song until stop is pressed. Press and hold this button to activate EQ mode, which
let select among the dierent types equalization that can be applied the song currently playing.
3. STOP/POWER BUTTON - Press this button once to stop the Mp3 player. Press and hold this
button to the Mp3 player on/o.
4. USB/MEMORY CARD/WIRELESS BUTTON - Press this button once to select the USB drive.
Press and hold this button to select the Memory Card drive.
5. MIC LEVEL - This knob is used to regulate the microphone output volume. Turning the knob in
a clockwise direction will increase the volume level.
6. LINE LEVEL INPUT VOLUME – This knob is used to regulate the output signal of the line level
source connected to the Line Level Input Jack (13).
7. OUTPUT VOLUME - This knob is used to regulate the output volume. Turning the knob in a
clockwise direction will increase the volume level.
8. TREBLE CONTROL – This knob is used to adjust the amount treble applied to the output sig-
nal. The maximum amount of treble gain is +12dB and the maximum amount of treble decrease
is -12dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble
applied to a channel signal, turning the knob in a clockwise direction will increase the amount
of treble applied to a channel signal.
9. BASS CONTROL – This knob is used to adjust the amount bass applied to the output signal.
The maximum amount of bass gain is +12dB and the maximum amount of bass decrease is
-12dB. Turning the knob in a counter-clockwise direction will decrease the amount of bass ap-
plied to a channel signal, turning the knob in a clockwise direction will increase the amount of
bass applied to a channel signal.
10. MAIN POWER INLET – This connector is used to supply main power to the unit via the
included detachable power cord. The power connection uses an I.E.C. type connector, use
only the supplied polarized AC power cord. Use only a power cord that matches this type
of connection. Be sure to only connect this unit to a power outlet that matches the printed
power label on the unit. Never use a power when the ground prong has been removed or
broken o. The ground prong is used to reduce the risk of electrical shock in case of an elec-
trical short. This cord is designed to t in one direction only. Do not attempt to force a cord
if it does not t, be sure the cord is being inserted properly.
11. MAIN POWER SWITCH – This is the main power ON/OFF button. Before main power is
applied, be sure you have made all connections to the speaker. Remember to avoid damaging
pops to the speakers, the mixer is turned on rst and turned o last.
12. XLR PARALLEL OUTPUT JACK – This jack is used to send the incoming line level signal from
either of the Line Level Inputs Jacks to another ELS15 BT or other line level input jack such as
a mixer or power amp.
13. BALANCED XLR/RCA COMBO LINE INPUT – This connection is designed to accept a bal-
anced line input signal from a mixer or other line level device with a balanced output jack. Use a
Loading ...
Loading ...
Loading ...