Crown PNT332 Tool Shop Pneumatic 18-Gauge Narrow Stapler

Product's Documents

Below are documents related to this product, you can read online or download:
PNT332 photo

Operator’s Manual

This is the main product document for model PNT332.

The file format is pdf, 12 pages, you can download this manual here .

background
208-2197
1-9/16'' 18 GAUGE NARROW CROWN STAPLER
background
Be careful not to nail on top of another nail, as
this can create sparks, resulting in the ignition of dust or fumes.
Do not wear loose fitting clothing or jewelry. Use a helmet for long hair. These items
can get caught in moving parts, causing serious personal injury.
tired
may result in personal injury and/or the injury of others.
intensity noise may cause hearing loss.
background
work piece
Fasteners
Store the tools, in a secure place, when not in use and
background
could result in injury.
c
background
5.7mm(1/4")
Gauge: 18
18
2 Hex Keys
Oil Bottle
NO-marring rubber tip
5/8” to 1-9/16”16-40mm
18 Gauge Narrow
Crown Stapler
A
B
C
E
F
G
H
40mm
(1-9/16'')
16mm
(5/8'')
1-9/16''
serious personal injury.
Magazine capacity: 100 staples
H
background
18 Gauge Narrow Crown Stapler
18 Gauge Narrow Crown Stapler
1-9/16''
1-9/16''
fastener
background
1. Depress the click fixer(49) to release the movable magazine and
pull the magazine out fully as shown .
2. Place a full stick of the desired type and size of fasteners on the
fixed magazine. Up to 100 fastener can be loaded in the magazine.
3. Push the movable magazine forward until the fixed lever click and
lock it.
steep of an angle
2. To fire, place the Safety Nosepiece of the Nailer on the work piece.
If you slide the nose of the nailer slightly forwards or backwards, without lifting the
tool and then pulling the trigger, it will fire again.
3. To re-engage the Safety, just let go of the Trigger and lift the tool from the work piece.
background
FASTENER JAMMED INSIDE MAGAZINE
Open the Magazine Latch and pull open the Magazine Cover (located at the front of the tool).
Remove the fastener that has caused the obstruction using a long nose plier.
Reload the magazine with the required fasteners and close securely.
FASTENER JAMMED IN THE DRIVE GUIDE
Pull out the Quick Release Latch (located at the front of the tool) and disengage the Quick Release Spring.
Remove the fastener that has caused the obstruction using a long nose plier.
Replace the Drive Guide Coverand latch the Quick Release spring up against both hooks.
Be aware of the materials thickness when using nailer because a protruding nail,
for example, may cause injury.
a p
background
background
0
background
background
1-9/16'' 18 GAUGE NARROW CROWN STAPLER WARRANTY
m
m

Specifications

Crown PNT332 Questions and Answers