Loading ...
– 9 – – 10 – – 11 –
– 12 –
–
13 – – 14 –
– 15 –
3. Slide the survey rod or wooden pole
between the clamp’s jaws.
4. Turn the jaws screw clockwise to hold
the general-purpose clamp securely in
place.
Attaching the Receiver to a Grade Rod
1. Slide the general-purpose clamp into
the receiver until it “clicks” into
position.
2. Turn the jaws screw counterclockwise
to open the clamp’s jaws.
Specifications
Accuracy ±1.0 mm (±⅓ in.)
Elevation Readout Front LCD and simultaneous rear corner LEDs (red,
green, and blue)
Audio Control Loud / Low / Off
Capture Height 50 mm (2 in.)
Marking Notches 50 mm (2 in.) below top of receiver
Power Source 2 AA alkaline batteries
Battery Life 50+ hours
Low-Battery Indicator Flashing battery symbol on LCD
Automatic Shutoff 30 minutes after last laser strike or button press
Drop Resistance 1.5 m (5 ft) onto concrete at room temperature
Water Proof / Dust Proof Yes - IP67
Operating Temperature –20 °C to 60 °C (–4 °F to 140 °F)
Storage Temperature –40 °C to 70 °C (–40 °F to 158 °F)
Regulatory Conformance 2004/108/EC; 2002/95/EC; 2002/96/EC
Notice to Our European Union Customers
For product recycling instructions and more information,
please go to: www
.trimble.com/environment/summary.html
Recycling in Europe
To recycle Trimble WEEE,
call: +31 497 53 2430, and
ask for the “WEEE associate,” or
mail a request for recycling instructions to:
Trimble Europe BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Eersel, NL
North & Latin America
Spectra Precision Division
8261 State Route 235
Dayton, Ohio 45424
U.S.A.
(800) 538-7800 (Toll Free)
+1-937-245-5600 Phone
+1-937-482-0030 Fax
Europe
Trimble Kaiserslautern GmbH
Am Sportplatz 5
67661 Kaiserslautern
GERMANY
Tel +49-(0)6301-71 14 14
Fax +49-06301-32213
Africa & Middle East
Trimble Export Middle-East
P.O. Box 17760
Jebel Ali Free Zone, Dubai
UAE
+971-4-881-3005 Phone
+971-4-881-3007 Fax
Asia-Pacific
Trimble Navigation Singapore
PTE Ltd.
80 Marine Parade Road, #22-06
Parkway Parade
Singapore, 449269
+65 6348 2212 Phone
+65 6348 2232 Fax
China
Trimble Beijing
Room 2805-07, Tengda Plaza,
No. 168 Xiwai Street
Haidian District
Beijing, China 100044
+86 10 8857 7575 Phone
+86 10 8857 7161 Fax
www.trimble.com.cn
Maintenance and Care
System Cleaning
For maximum performance and accuracy always keep the display
and receiver windows clean. When cleaning, apply very light pressure
and use only a good quality glass cleaner on a soft cloth to clean the
exterior of the receiver and its windows.
CAUTION:
A dry cloth or abrasive organic cleaner could scratch or
damage these surfaces.
CAUTION:
Do not submerge the receiver.
Request for Service
To locate your local dealer or authorized Trimble Service Center
outside the U.S.A for service, accessories, or spare parts, contact one of
our offices listed below.
Warranty
Trimble warrants the receiver to be free of defects in material and
workmanship for a period of three years. For the first 24 months,
Trimble or its authorized service center will repair or replace, at its
option, any defective part for which notice has been given during the
warranty period. For months 25-36 an exchange fee may apply.
Customers should send products to the nearest Authorized Factory,
Dealer, or Service Center for warranty repairs, freight prepaid. In
countries with Trimble Service Subsidiary Centers, the repaired
products will be returned to the customer, freight prepaid.
Any evidence of negligent, abnormal use, accident, or any attempt to
repair equipment by other than factory-authorized personnel Trimble
certified or recommended parts, automatically voids the warranty.
Special precautions have been taken to ensure the calibration of
the receiver; however, calibration is not covered by this warranty.
Maintenance of the calibration is the responsibility of the user.
The foregoing states the entire liability of Trimble regarding
the purchase and use of its equipment. Trimble will not be held
responsible for any consequential loss or damage of any kind.
This warranty is in lieu of all other warranties, except as set forth
above, including an implied warranty merchantability of fitness for a
particular purpose, is hereby disclaimed. This warranty is in lieu of all
other warranties, expressed or implied.
Spectra Precision Division
8261 State Route 235
Dayton, Ohio 45424-6383
U.S.A.
www.trimble.com/spectra
© 2011, Trimble Navigation Limited. All rights reserved.
Reorder PN 1277-7511 (2/11)
General-Purpose Clamp
The C61 clamp allows the receiver to be attached to a survey rod or
wooden pole.
1. Release Tab – allows the receiver to be locked onto or released from the
general-purpose clamp.
2. Jaws – close/open so that the general-purpose clamp can be attached to or
released from a survey rod or wooden pole.
3. Jaws Screw – controls the closing/opening of the jaws.
4. Reading Edge – aligns with the receiver’s on-grade marking notches.
5. Bubble Screw Holes – are where the optional 1277-6251S rod bubble kit
is mounted.
1
3
2
5
4