Loading ...
Loading ...
Loading ...
Speaker Connection
After connecting, when you start up the reverse gear, the unit will receive the picture from car rear
view camera.
Note:
- Only use groundless loudspeakers.
- Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your
loudspeakers at higher volumes.
- Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage
the unit.
- Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body
(GND). The unit is using a BTL circuit and each loudspeaker must be connected with insulated
cables according the diagram.
- Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away
from the antenna and/or antenna extension parts.
Connect the speakers according the following diagram, incorrect connections will damage the unit or
your loudspeakers.
Correct connection
Left front - Right front | Left rear - Right rear
Incorrect connections
04
Loading ...
Loading ...
Loading ...