Loading ...
Loading ...
Loading ...
7
Figure 3.2Figure 3.1
Fan Pull Chain
Switch Housing Cap
INSTALLATION WITHOUT LIGHT KIT (optional)
To install the fan without the light kit:
1. Remove the three tter plate screws from the tter plate. Attach the switch housing cap to the tter plate using the tter plate
screws (Figure 3.1).
2. Attach the pull chain extension (Figure 3.2).
Figure 4.2Figure 4.1
Reverse Switch
Light Pull Chain
Fan Pull Chain
OPERATING INSTRUCTIONS
1. The fan pull chain has ve positions to control fan speed. One pull is high, two is medium, three is low, four is very low and ve
turns the fan off. The light pull chain has two positions to control the light, on and off (Figure 4.1).
2. Use the reverse switch located on the switch housing to optimize your fan for seasonal performance. In warmer weather,
push the reverse switch left which results in downward airow creating a wind chill effect. In cooler weather, push the reverse
switch right which results in upward airow that will help move hot air of the ceiling (Figure 4.2).
Fitter
Plate
Screw
Loading ...
Loading ...