Loading ...
Loading ...
Loading ...
"FABRIC TOP" GRASS CATCHERS
TO ASSEMBLE AND ATI'ACH GRASS
CATCHER
* Put grass catcher frame into grass bag
with rigid part of bag on the bottom.
• Slip vinyl bindings over frame.
NOTE: Ifvinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
, Lift the rear door on the mower housing.
* For HINGE BRACKET mounted catcher,
place the grass catcher frame onto the
formed tabs on the rear door hinge
bracket.
° For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets,
* For DOOR PIVOT PIN mounted catcher,
place the grass catcher frame hooks
onto the door pivot pins.
• For DOOR SLOT mounted catcher,
place the grass catcher frame hooks into
the slots of the rear door.
NOTE: The grass catcher is secured to the
lawn mower housing when the rear door is
lowered onto the grass catcher frame.
Vinyl Frame
bindings opening
HINGE BRACKET MOUNTED
"_---"-, Rear door
bracket
G ras8
catcher
frame
Formed tabs
HANDLE BRACKET MOUNTED
Handle bracket Rear Grass
catcher
handle
Catcher frame side hook
DOOR PIVOT PIN MOUNTED
Pivot pins Rear Grass
catcher
"_- handle
_,CAUTION: Under normal usage, the
catcher materia_ is subject to deterioration
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked to
ensure compliance with original manufac-
turer's specifications.
ACAUTION: Do not run lawn mower
without the discharge guard (rear door),
approved grass catcher, clipping deflector
or mulcher plate in place. Never attempt
to operate mower with the discharge guard
(rear door) removed or propped open.
Catcher frame hook
DOOR SLOT MOUNTED
Rear door slots
Grass
catcher
handle
Catcher framehook
6
Loading ...
Loading ...
Loading ...